I have a 1915cc that i had running for about a month. I drove it out to White Rock one afternoon and on the way it backfired a few times and died. It would turn over but not start. Found there was no spark. I have replaced the coil with a new blue coil, new compufire electronic points and a new alternator with built in regulator and I now have spark but it just wont fire up. I have static timed it to TDC on number one but nothing seams to work. I pulled the distibutor and the drive gear doesn't line up the way it is supposed to, prob 30 deg off but i adjusted the dist to allow for this. I was getting some backfire through the carbs but now nothing. Anybody have any ideas?