Author Topic: Clutch Noise (Read 3282 times)

dirtydeedss · « **on:** July 15, 2007, 09:32:12 PM »

When i press my clutch pedal i can hear a almost grinding noise. Was wondering if anyone has heard this before, im thinking its the throwout bearing. and when I have the pedal pushed in The lever on the tranny starts to mildly shake. was just wondering if anyone might know what it is before I go tearing it all apart.
derek

dirtydeedss · « **Reply #1 on:** July 15, 2007, 09:57:10 PM »

And forgot to mention, I didnt put and grease or oil in or on the bearing, should I have?

BUSDADDY · « **Reply #2 on:** July 15, 2007, 10:17:30 PM »

Definiteley sounds like the bearing is bad, could have popped off one of the fingers on the release lever too.

The bearings are sealed and can't be greased.

silas · « **Reply #3 on:** July 15, 2007, 11:45:58 PM »

ditto to what busdaddy said.

a little high temp grease on the shaft the throwout bearing rides on could help a bit. and safety wire the clips that hold the bearing to the fork.

dirtydeedss · « **Reply #4 on:** July 16, 2007, 08:29:46 AM »

thanks guys

dirtydeedss · « **Reply #5 on:** July 16, 2007, 11:29:21 PM »

i replaced the bearing and the noise went away. buut the bearing feels new . could it maybe fell smooth when not under load?

BUSDADDY · « **Reply #6 on:** July 17, 2007, 08:05:38 AM »

It could happen, how were the release shaft bushings? Contacting the pressure plate crooked could cause that too.

dirtydeedss · « **Reply #7 on:** July 17, 2007, 08:14:05 AM »

they seemed fine the shaft didnt have any movement