Author Topic: Blew A Spark Plug, What Would You Do? (Read 2886 times)

egspot · « **on:** June 28, 2006, 10:30:14 AM »

OK so The plug is out and I could have someone tap it.

I could get two new heads (this is a good running motor and tapping would be a band aid in my opinion) and find someone with a shop to relaced them both, all for about 500.00.

OR

Find someone to build my New engine (with some old parts, some new parts) for which I will need to get a Flywheel, engle110, other miscellaneous parts. this will cost more, but how much more?

Chris · « **Reply #1 on:** June 28, 2006, 10:57:13 AM »

call Airspeed.

egspot · « **Reply #2 on:** June 28, 2006, 11:15:48 AM »

Quote

call Airspeed.

That was my 1st call. They do not do small stuff like this.

Emilio

Chris · « **Reply #3 on:** June 28, 2006, 11:24:49 AM »

get the parts from Airspeed and do it yourself.

dannyboy · « **Reply #4 on:** June 28, 2006, 09:02:21 PM »

get a time sert from airspeed, and give duane a call, i believe he has the correct reamer/tap to install it
it will be more cost effective/ time saving than pulling the head, and a properly installed time cert wont be a bandaid.
-dan

egspot · « **Reply #5 on:** June 28, 2006, 09:48:19 PM »

Quote

get a time sert from airspeed, and give duane a call, i believe he has the correct reamer/tap to install it
it will be more cost effective/ time saving than pulling the head, and a properly installed time cert wont be a bandaid.
-dan

Thanks Danny,

Would you know Duane's number and his location?