Author Topic: Welding An Exhaust System (Read 1585 times)

reefreshd_jive · « **on:** May 06, 2005, 06:24:47 PM »

hey everyone.
i am just wondering if anyone out there can help me tomorrow afternoon, or night to weld up an exhaust system for my car. i have most of it fitted, so i hope it will be fairly simple...
for payment i have a brand monza 4tip GT exhaust that i will never use, or if you prefer beer...
let me know
thanks
james.

James Buchan · « **Reply #1 on:** May 06, 2005, 06:27:38 PM »

Depending on Material you will likely need Tig for a nice job

reefreshd_jive · « **Reply #2 on:** May 06, 2005, 06:48:31 PM »

i am using 16 gauge steel.

dannyboy · « **Reply #3 on:** May 06, 2005, 07:42:38 PM »

mig will be fine, but be prepared to grind

James Buchan · « **Reply #4 on:** May 06, 2005, 07:58:17 PM »

Yup....

Is the system fitted and just need production weld (tacked together) or does it need to be designed/fitted

reefreshd_jive · « **Reply #5 on:** May 06, 2005, 10:37:18 PM »

it is done. i hopefully have it on for sunday. just need to re-route my valve cover breather hose. cause it is running close to the muffler, and then get a mounting bracket.
and tig welder was used.