« previous next »
Pages: [1]   Go Down

Author Topic: Friggen Bored.  (Read 2873 times)

0 Members and 1 Guest are viewing this topic.

Offline jim martin

  • If something is priced to good to be true ,do yourself a favour. DONT be a IDIOT and BUY IT
  • *
  • Posts: 1406
  • Karma: 1
    • http://www.dialedinperformance.com
Friggen Bored.
« on: January 08, 2005, 08:59:52 PM »
well another big saturday night at the martin house.everones asleep but me.
so ,i'm hearing alot of talk about big plans.so lets hear them ,what are you up to.!!!!!!!


-i'll start ,first i'm sick of working in a clutterd shop so i'm in the process of a major garage overhaul.security!/walls/lights/floor/ storage ,the whole shabang.then i will go over the car and finish all the small little things i never got a chance to due.
since getting the car on the road late this year the first main goal was to relax and enjoy it  as well as drive it hard and see if there is any more week points.over all things held up well and it was sure great to have it painted and running at the same time.
since the car is reassembled late this year there is not a whole lot of big plan to do. so,
this years big plan for me will be to finnally get to the track and see how well it can run on and off the bottle.and take part in a few shows / events this year.
pretty boring stuff,come on scare me .what are you planning
« Last Edit: January 08, 2005, 09:15:42 PM by jim martin »
Logged




the 'WOK" June 2006 Hot VW's feature car  9.830 sec at 143.44 mph.
Sponsored by : LUCAS OIL PRODUCTS   www.lucasoil.com
KROC head porting services
Dialedinp

Matt

Friggen Bored.
« Reply #1 on: January 08, 2005, 09:38:27 PM »
I'd be happy with getting the notch in my garage again.  Then the fun for me can start with a pan swap for a \"Brad Purser Special\" type 3 pan with type 1 bulkhead so I can run a 3\" narrowed bj beam, and a set of torque thrusts. I still need to build the 2275 I have in pieces in the closet, and general assembly of the car. I \"hope\" to have it on the road this year, but I've been saying that for the last 5 years...
Logged

Offline rustybus

  • Full Member
  • Posts: 1641
  • Karma: 1
Friggen Bored.
« Reply #2 on: January 08, 2005, 09:42:38 PM »
this years plan is to finish the shop. :huh:
help a few friends with there vdub's B)
start and finish then sell the '67 bug :D
dial in '57 bug and get it in the road :blink:
start on the bus project  :P
drink way to much beer  :wacko:
bitch that I get nothing done ]:(
 and finally not succeed at my plans :(
maybe drink more beer because I failed :wacko:
It's going to be another great year :lol:  :lol:  
Logged

Offline rustybus

  • Full Member
  • Posts: 1641
  • Karma: 1
Friggen Bored.
« Reply #3 on: January 08, 2005, 09:44:29 PM »
Oooh,   I forgot try to steal Matt's camera
 :lol:   :lol:  :lol:  :lol:  :lol:  :lol:  :lol:  :lol:
« Last Edit: January 08, 2005, 10:37:49 PM by rustybus »
Logged

Offline silas

  • *
  • Posts: 6825
  • Karma: 20
    • Some cool videos...Check them out!!
Friggen Bored.
« Reply #4 on: January 08, 2005, 10:55:59 PM »
hopefully continue metal work on my 56. passenger side heater channel & rear crossmember, front firewall, front clip....there is alot to do.

currently taking part in my first co-op work experience at a shop in van, busting knuckles and turning wrenches. back to school for term 2 in april.

apart from that, save money to hopefully buy a beater driver acvw. man i miss driving the type 1. rest and relax, eat, drink and be merry. B)  
Logged

Offline Hansk

  • Full Member
  • Posts: 1638
  • Karma: 4
Friggen Bored.
« Reply #5 on: January 09, 2005, 12:07:49 AM »
finish my nieghbors trany :wacko:  
Logged
Big fat black fastback

Offline steveo_32

  • Gonna'own em all one day!
  • *
  • Posts: 2051
  • Karma: 3
  • Waz up
Friggen Bored.
« Reply #6 on: January 09, 2005, 01:03:25 AM »
#1 Get a house................................
#2 Get a house................................
#3 Get a Garage to fir the 56oval/57convert/54 oval rag/55 walkthru/59singlecab/ and dads 71 ghia
#4 Get nice poeple living next door to my new house.
#5 Get my jukebox fixed and sit and drink lots of .....juice...........
Call ya'll over and laugh at how much money in rust i have!
 
Logged
1958 Samba 23 Window
1963 Ghia
1965 type 3 wago
1971 KG14 convert
Looking for a barn find oval!! something un-screwed with(or split)

Offline Chris

  • Posts: 6118
  • Karma: -125
  • Car.
Friggen Bored.
« Reply #7 on: January 09, 2005, 01:05:27 AM »
Quote
#1 Get a house................................
#2 Get a house................................
#3 Get a Garage to fir the 56oval/57convert/54 oval rag/55 walkthru/59singlecab/ and dads 71 ghia
#4 Get nice poeple living next door to my new house.
#5 Get my jukebox fixed and sit and drink lots of .....juice...........
Call ya'll over and laugh at how much money in rust i have!
sup with the jukebox? I know some people who do that sort of stuff...........
Logged

Offline OUTKAST

  • *
  • Posts: 1908
  • Karma: 3
Friggen Bored.
« Reply #8 on: January 09, 2005, 10:28:52 AM »
Need to pour concrete pad for garage addition and get it covered over then wiil enclose other carport to become heated garage .
Then some serious udercarriage work on the bus hopefully  :rolleyes:
I've got the time and some limited funds so we will see what goes  
Logged

Offline Bruce

  • Full Member
  • Posts: 2915
  • Karma: -65458
Friggen Bored.
« Reply #9 on: January 09, 2005, 11:52:51 AM »
One more gear.
Logged

Offline jim martin

  • If something is priced to good to be true ,do yourself a favour. DONT be a IDIOT and BUY IT
  • *
  • Posts: 1406
  • Karma: 1
    • http://www.dialedinperformance.com
Friggen Bored.
« Reply #10 on: January 09, 2005, 04:52:28 PM »
Quote
One more gear.
how did the shifter end up
Logged




the 'WOK" June 2006 Hot VW's feature car  9.830 sec at 143.44 mph.
Sponsored by : LUCAS OIL PRODUCTS   www.lucasoil.com
KROC head porting services
Dialedinp

Offline dannyboy

  • Full Member
  • Posts: 1082
  • Karma: 1
Friggen Bored.
« Reply #11 on: January 09, 2005, 10:25:06 PM »
fuel injection
head work
rebuild front suspension
rebuild rear suspension put in adjustable spring plates
ad line loc
get drag-bar powder coated
redo tach mount
do chris' tach mount
and put in some fiberglass buckets

 
Logged

Stephan Schmidt

Friggen Bored.
« Reply #12 on: January 10, 2005, 04:10:16 PM »
Study, Study, Study, work a bit,

AHH, so many years of school, but it sure will pay off in the end  :rockon:

 
Logged

Offline Bruce

  • Full Member
  • Posts: 2915
  • Karma: -65458
Friggen Bored.
« Reply #13 on: January 10, 2005, 04:33:43 PM »
Quote
how did the shifter end up
I tightened up the play between the chrome shaft and the bottom shaft, then also tightened up the play in the main pivot.  Should work even better than when it was in your car.
I've also modded a second shifter to work with the 5 speed, and adapted the Chevy shifter to it.  It is gonna be really nice since its action is even smoother than a Hurst.
Haven't started putting the trans together yet.
Logged

Offline KOOL-AID MAN

  • Full Member
  • Posts: 706
  • Karma: 0
Friggen Bored.
« Reply #14 on: January 10, 2005, 04:46:38 PM »
My plan is to finish my 1st year apprenticeship at bcit, for (electrical)

Then I have a few plans for my car:

Paint it in mid spring with a flat colour, not to sure what colour yet??
New Header system.
Maybe purchase some wide 5 style wheels, either Brms or Ercos.
Race at mission raceway. cause i've never done it before.

Party!!!!
Logged

Offline James Buchan

  • Full Member
  • Posts: 6403
  • Karma: -51
Friggen Bored.
« Reply #15 on: January 11, 2005, 12:26:58 PM »
I'm not telling.  :ph34r:  
Logged

Offline HeliMike

  • Full Member
  • Posts: 1158
  • Karma: 0
Friggen Bored.
« Reply #16 on: January 11, 2005, 01:17:16 PM »
Well I'm freakin busy with the \"pink panther\" as my friends call it.


- IRS conversion in a couple of weeks complete with a new rear disc kit I'm pickin up from airspeed.

- Completely seal the whole interior of the car and soundproof the hell out of it. That's this weekend. Maybe finally put my stereo in too.

- Tear down my freshly-built 2110 and install a new forged crank to replace the cast POS that broke in it (after 3 weeks F*%^ING I might add) :angry:  :angry:  :angry:  :angry:  :angry:

- Strippin 'er down in a few months for a respray to get rid of the horrible colour that's on it. I'm thinking that Audi TT \"flattish grey\" or HOK Organic Kandy Green over a gold metallic base (kinda pimp-ish), but not sure yet.
I'm doing it all myself to save the cash for the next step.

- 2 words; Air ride. I'm jumpin on that bandwagon some time in May I think but haven't seen a good enough kit yet. We'll see what happens but I'm not holding my breath.

- Goin' back to the books after a ten year hiatus. I went to high-school to eat lunch so now it's upgrade time. Better late than never I guess.

Well that's my plan.  :rockon:  :mullet:

Maybe I should actually get back to work now.
Logged
67 Sunroof Beetle

Offline silas

  • *
  • Posts: 6825
  • Karma: 20
    • Some cool videos...Check them out!!
Friggen Bored.
« Reply #17 on: January 11, 2005, 11:54:35 PM »
Quote
Goin' back to the books after a ten year hiatus. I went to high-school to eat lunch so now it's upgrade time. Better late than never I guess.

there's never a bad time for that.

i just recently went back after 10 years away and it feels great. 'twas a little hard to pick up the routine again, but after a couple weeks it's like clockwork.

best of luck. ;)  
Logged

Offline Custom76Bus

  • Full Member
  • Posts: 254
  • Karma: -1
    • http://vw.norquaydesign.com
Friggen Bored.
« Reply #18 on: January 12, 2005, 12:39:16 AM »
Still hoping to get my '76 on the road by summer lol... with any luck though I'll get working on the engine swap a little more seriously once i get it inside (a little warmer in the garage than at the side of the house these days!). Lots on the to-do list with this puppy, but best to get it done right.

In the meantime, might be buying another bus!! I'll know this weekend for sure, gonna make sure I can aircare it before I buy it. It'll give me a daily driver till i get my 76 running. Should be fun  B)  B)  B)

Just found out I'm actually an SFU student so i'll start looking at course options for them now too :).
Logged
--Gavin
1976 Custom Westfalia... in the works.

Offline el_flechador

  • *
  • Posts: 459
  • Karma: 0
Friggen Bored.
« Reply #19 on: January 13, 2005, 01:11:55 PM »
Get a new job(its great to be laid of on xmas eve with no warning!!!) Finally get my bus rolling, then maybe another project  eeer daily driver for my wife i mean, do some exploring hit the shows and make some more buddies
Logged
Pages: [1]   Go Up
« previous next »