« previous next »
Pages: [1]   Go Down

Author Topic: Plug Gap  (Read 2563 times)

0 Members and 2 Guests are viewing this topic.

Offline Chris W

  • *
  • Posts: 493
  • Karma: 0
  • Portland Oregon
Plug Gap
« on: January 08, 2009, 11:30:01 AM »
I am reinstalling my engine after re-jetting and wondering where I should start with plug gap. It was at .032 before changing the jets.

Thanks

69x94
42x35 CB heads
40mm carbs 55 idles; 200 air, 140 mains, 32 vents.
009
« Last Edit: January 08, 2009, 05:36:19 PM by Chris W »
Logged

Offline Cameron

  • *
  • Posts: 525
  • Karma: 1
Re: Plug Gap
« Reply #1 on: January 08, 2009, 05:33:29 PM »
Is that supposed to be 0.032" (inch)?

IIRC, if you are running a stock ignition system, the recommended gap is 0.028". So, 0.004" (four thou.) is not going to matter. If you are running a capacitive discharge system, like MSD or other brand, you should be able to set the gap larger. Check the instructions of your CDI unit.
Logged


It's an insane world out there... and I'm proud to be part of it!

  

Offline Chris W

  • *
  • Posts: 493
  • Karma: 0
  • Portland Oregon
Re: Plug Gap
« Reply #2 on: January 08, 2009, 05:37:58 PM »
Added the .0  :)

It's a stock set up.
Logged
Pages: [1]   Go Up
« previous next »