2017 Great Canadian Swap Meet Wish List

[getgeoff]

Hey everyone I thought I would start this as we are getting close to the show. If you have anything that you are looking for in VW parts, please put in a request and hopefully someone will be able to make your wish come true. I'm bringing a trailer full of good stuff from the sunny/smokey Okanagan and hope that you will stop by my swap spot and say hi.
geoff

[gsun]

Looking for a sunroof for an early bay. Just the roof. Have the mechanism.

[getgeoff]

Looking for 64-66 rear main hatch locking hardware. Push button style with no finger pull and a whole rear 66 hatch would be nice also.

[bagged oval]

Looking for original westy interior  wood paneling for a 70 bay .

[josh]

needs:

-Clearanced stroker case machined ready to go
-small ball bus shifter
-pass side dove blue (early) cab door
-ratty dove blue rear truck gate
-rear press bumper for truck
-front floor mat for 56 bus
-ratty euro flat lens tail lights for 55 semaphore bus
-pre 57 brake light lens/assembly
-OG paint commercial grey hub caps
-leftover replacement bus metal....fat lip doglegs, cargo floor...rockers?

[Aristotlejones]

Need for 81 Caddy/Rabbit Pickup

- Right/Pass side End Caps for Rear Bumper (inner & outer) [will take any that fit]

- Jetta 4 door triangular stationary windows w hardware & seals

- 8" or longer tranny linkage arm w intact locking caps (not OEM - has Jetta tranny)

- Square air duct outlets - Black or dark brown with large wheel to close flap instead of breakable thin arm

Have 86 white stock cabrio fenders I don't need.

I'll be wearing grey & orange coveralls w brown floppy hat if it gets too sunny.

Thanks ahead,

aj

[kinggeorge13]

- Westfalia/Riviera interior cabinets, back seat/bed, mattresses, sink/water tank parts, etc.  Parts or whole.
- late bay fuel injection parts (injectors, wiring, cpu, afm, vacuum-anything valve, cold start valve, plenum, etc).  Just looking for spare parts and quite possibly dreaming one day of taking one of my buses that was converted by a po from FI to dual carbs and I'd like to take it back to FI as an interesting project.   A full kit off a blown engine or something would be great but if not, I'll slowly piece together parts till I get there.
- bus front doglegs from 1973 to 1979.   Nice to have the step or whats left of a step still attached.   Rusty is ok but no good to me if it's pretty much lost it's strength/structure.   I can fix a lot of it but it's got to be salvageable.   
- Westfalia original fluorescent camping light over sink area with undamaged plastic lens (working but actual tube not necessary).   I have a couple with cracked/broken lens covers
- VW bus front seats in reasonable condition (yeah, yeah, who isn't looking for those?) 70s bay buses
- Working brake booster that will work in a 1975 era bus
- Starter/solenoid for any bus 1973-1979 (working, please)
- working good transmission for 1977 bus (yeah, yeah, keep laughing but it's a "wishlist", right?)
- good/complete exhaust system for 1973-1979 buses
- good/working fuel pump for 1973/1979 buses (versions for either carbs or FI is fine)

That's a start!

Looking forward to the Drive-in Movie theater tomorrow evening!   I'll be there with my yet-to-be fixed up 1974 Orange Westy.   

Thanks!
George

[getgeoff]

Which style of bay front seats were you looking for kinggeorge?

[ger1]

Looking for rear fender skirts for early bug .

[WRENNVAGEN]

LOOKING FOR ANYTHING THAT IS RELATED TO AN "INVADER-GT-" KITCAR FROM THE 70'S MADE IN SPAIN BY AUTOKIT. REALLY ALL I NEED IS A REAR WINDOW & AN ENGINE BAY DECKLID. ALSO BECAUSE THESE WERE NOT A COMMON KITCAR CUZ THEY ALWAYS LEAKED, I WOULD BUY TAIL LIGHTS, PLEXIGLASS GULLWING STYLE DOORS,EMBLEMS,PLEXI HEADLIGHT COVERS,ETC. JUST TO HAVE SOME XTRAS. EVEN IF YOU KNOW OF WHERE INVADER-GT- STUFF IS COLLECTING DUST LET ME KNOW!

ALSO- ANY SOLID "RANCHO" PRO STREET TRANS THAT HASNT BEEN ABUSED,..(YET)
        -USED+COMPLETE BERNIE BERGMAN PORSCHE STYLE FAN SHROUD KIT THAT'LL FIT EITHER A         
          1914cc or 2332cc.
        -A DECENT NO RUST, ORIG, 1967 DELUXE BEETLE HOOD.
        -WIDE 5 DISC BRAKE KIT FOR BALL-JOINT BEAM. AND 2 INCH DROPPED SPINDLES.
        -ANY 1/2 SCALE FIBERGLASS GO KART CAR BODIES. ESPECIALLY A SPLIT BUS MADE BY SICK &
          TWISTED CUSTOMS IN CALIFORNIA... YOU KNOW THE ONE IM SURE!!!!!!

 I'LL BE THE GUY WITH THE "MARTINI" PORSCHE 911 GO KART ON DISPLAY IN THE VENDOR AREA.

[reefreshd_jive]

I am after an early 60's Canadian Standard beetle. Unfortunately, I am out of town for the weekend. But if anyone sees one for sale there tomorrow. Shoot me a PM or text. 604-786-9091.

[steveo_32]

dude you still alive!!!!! nice to see ya!

[gsun]

Still looking....