i ran a new fuel line in the pan and was checking it for leaks.
i think my pump is rated for about 3psi see link
http://www.cip1.ca/ProductDetails.asp?Prod...CC%2DC10%2D5630i pumped fuel through it then capped it off and let the pressure build up.
the pump never stopped but it did go from definatly being on to very quiet to the point of almost stopping.
i thought it should shut off completley if it hit the right pressure but it did not, close but not off.
with that being said i had no leaks,did i just not let it pump long enough or with a bit of air in the line it could not completly pressurize?
thanks for any help