« previous next »
Pages: [1]   Go Down

Author Topic: Single Port Problem  (Read 3948 times)

0 Members and 1 Guest are viewing this topic.

Offline epitch1

  • Full Member
  • Posts: 35
  • Karma: 0
Single Port Problem
« on: October 26, 2003, 01:58:51 PM »
I have a brand new 1500 single port engine and a used dual port engine.I want to use the new single port engine but my only carburator  is a 2 barrel webber which wont fit on a single port engine.can i use the stack from the dual port engine and just cut the ends off the single port engine stack and join them to the dp stack?or should i  exchange heads if they are same bore?dont like that idea though because the dp heads are 30 yrs old.
Logged

Matt

Single Port Problem
« Reply #1 on: October 26, 2003, 02:33:06 PM »
I have good single port heads, intake and 28 pict carb. The carb is virtually new, brosol,  and the heads have no obvious cracks.  Could sell them if the price is right!

Matt
Logged

Offline JSimmons

  • Full Member
  • Posts: 52
  • Karma: 0
    • http://
Single Port Problem
« Reply #2 on: October 26, 2003, 11:56:53 PM »
Aloha,

There are Kadron single port kits out there.  I found one for my '67 1500SP from Proformance in California.  I'm sure that other people have them lying around on the dusty shelves of their garages/stockrooms somewhere.

~Joel

 
Logged
Beer is proof that God loves us and wants us to be happy.  ~Benjamin Franklin
Pages: [1]   Go Up
« previous next »