Author Topic: Gas Tank Sealer (Read 1984 times)

Russ · « **on:** April 25, 2005, 04:47:44 PM »

i'm going to seal my gas tank this comming weekend and wondered what peoples have used to do it?
i think the old car center sells a kit.
anybody know of any other places that carry something like this
thanks russ

James Buchan · « **Reply #1 on:** April 25, 2005, 05:06:08 PM »

I used POR for mine, got it at springmeet a year ago. I think Lordco carries it. Alternatly you could check a radiator shop and see if they will coat it for you.

Glenn · « **Reply #2 on:** April 25, 2005, 05:48:45 PM »

I used the POR 15 kit also.

http://www.glenn-ring.com/tech/gas_tank_resto.htm

Russ · « **Reply #3 on:** April 25, 2005, 07:21:44 PM »

thanks guys,
anybody know if this is sold local
Steveo? lordco?

66volksie · « **Reply #4 on:** April 25, 2005, 08:03:40 PM »

hey russ! try concept finnishes in richmond on bridgeport near shell, i bought some por 15 there. they may have it. 279-0995 murray

steveo_32 · « **Reply #5 on:** April 29, 2005, 11:30:40 PM »

Just ordered three in for my store! If you have a problem just phone the Mission one and I'll help ya out!

GRK · « **Reply #6 on:** May 01, 2005, 12:10:45 AM »

I know Hansk used something for his single cab not sure what? Talk to him aswell.

Bruce · « **Reply #7 on:** May 01, 2005, 02:39:23 PM »

Russ, I did the tank on Rick's 54 using the stuff from The Old Car Center. IMO it didn't do a very clean job. The coating was very thin in some areas, and really thick in others. I tried to talk him out of it because his tank was perfectly clean on the inside before I started. I wouldn't do it.

Hansk · « **Reply #8 on:** May 03, 2005, 06:38:57 PM »

I didn't use any gas tank sealer. Just had them dipped. One pickeled at Redi-strip($200) and one hot tanked at a machine shop($20)