Author Topic: Fs 1964 Mostly Original Parts (Read 3009 times)

egspot · « **on:** February 12, 2007, 12:26:02 AM »

I do not want to trash good original parts. If you need something, please make me an offer.

-12v wiper assembly $15.00 obo
front bumper complete $40.00 obo

-drivers mirror 5.00
-heater hoses from engine to body 5.00
-front turn signal assemblies 15.00
rear bumper 30.00
right front fender 10.00
Two one rear side window , 20.00
rear window 5.00
-speedometer, trim ring 10.00
-ash tray assembly free
-front carpet,firewall carpet 30.00

-vent windows 10.00

-

Thanks for your viewing.
--

goldfish · « **Reply #1 on:** February 12, 2007, 04:32:18 PM »

how much for the ashtray and the front bumper?

stan62vw · « **Reply #2 on:** February 12, 2007, 05:55:56 PM »

how much for rims and tires is the rubber in good shape? what make? is there something wrong with one

GRK · « **Reply #3 on:** February 12, 2007, 06:35:49 PM »

Quote

how much for rims and tires is the rubber in good shape? what make? is there something wrong with one

I believe this might be whats left of his car after being T Boned?

Gary

egspot · « **Reply #4 on:** February 12, 2007, 07:22:28 PM »

Quote

how much for the ashtray and the front bumper?

Please make me a fair offer and if you want to you can pm it. i do not know what they may be worth and Samba is down.

Thanks

egspot

egspot · « **Reply #5 on:** February 12, 2007, 07:29:09 PM »

Quote

how much for rims and tires is the rubber in good shape? what make? is there something wrong with one

The 4 1/2 x15 are perfect and the tires (145 15 Japanese name) were just purchase from Airspeed
aat the end. the 5 1/2 X 15 (195 60 15 at 80% meat or so) I believe one of them may have been affected by the curve but i don't know. I have a replacement (5 1/2 X 15) without tire.

blarneyman · « **Reply #6 on:** February 12, 2007, 08:50:23 PM »

Do you have any idea if the gas tank will fit in a T3? I no longer have an outside filler on my car. :ph34r:

egspot · « **Reply #7 on:** February 12, 2007, 08:58:05 PM »

Quote

Do you have any idea if the gas tank will fit in a T3? I no longer have an outside filler on my car. :ph34r:

I don't know.

Aks DVKK, they may know.

egspot · « **Reply #8 on:** February 13, 2007, 03:14:15 AM »

All items have been priced.

Hansk · « **Reply #9 on:** February 13, 2007, 08:14:56 AM »

A Beetle tank does not swap into a type 3 , t 3's are much larger but........anything can be made to work I guess.

GRK · « **Reply #10 on:** February 13, 2007, 11:52:32 AM »

Is beam king link pin if so I'll take it. If car is still at Hans I'll come over and get it. Does it have the steering box on it?

Gary

egspot · « **Reply #11 on:** February 13, 2007, 12:55:43 PM »

Quote

Is beam king link pin if so I'll take it. If car is still at Hans I'll come over and get it. Does it have the steering box on it?

Gary

Box may be OK.

Hansk · « **Reply #12 on:** February 13, 2007, 11:47:19 PM »

Front beam and hood are gone.

stan62vw · « **Reply #13 on:** February 14, 2007, 05:00:46 PM »

so 5 rims 4 tires 250 iam sold how would you feel about meeting some where in hope or chiliwack wed the 21 or sun march 3

Chris · « **Reply #14 on:** February 14, 2007, 05:26:35 PM »

I am pretty sure you will have to go get them as he is recovering from a serious car accident and I dont htink he has a car anymore

egspot · « **Reply #15 on:** February 19, 2007, 08:35:57 AM »

Thanks dirtydeedss.

kafer_kid86 · « **Reply #16 on:** February 20, 2007, 05:06:02 PM »

hey E do u have a pedal assembly?

?

stan62vw · « **Reply #17 on:** February 21, 2007, 04:27:56 PM »

hey man i sent you a message a couple days ago i would like to work out a deal on tires and rims greyhound 60 bucks from surrey or try something else perhaps you could private message me your phone number and work something out if your intrested

egspot · « **Reply #18 on:** February 21, 2007, 06:06:14 PM »

Back on the block:

12v wiper assembly
front bumper complete
Two headlight assemblies

berliner · « **Reply #19 on:** February 21, 2007, 07:28:36 PM »

i need bits and pieces for my 60 when i put it back together as mine are a little scabby...how are the window/door handles and vent windows...is there an inside rear view mirror?.....mike

GRK · « **Reply #20 on:** February 25, 2007, 05:51:50 PM »

I took the beam off the car on Sat. Emilio you are a very lucky man that car was an accident waiting to happen!!! Next time when you buy a car have someone go with you and get a second opinion, There are almost as many cars in that as Geoff put in the Heb! Big differance being all parts were Brassed into place no welds. Front clip was brassed on, Dash section up half way on front window brassed in roof section brassed!!!!! Both rear door posts were tack brassed in place. Patches in fender wells were brassed right over all the rust with thin galvainized tin and rear quarter section was brassed tack in place. Silicone was on all door post seams and other spots!!!

I took the beam out and car has soo much rust Hans and I pushed on the front end and if we wiggled it I'm sure we could have broke the whole front end off right to the door posts!

All I can say Emillio is someone was looking after you it could have been alot worse!

Sorry to have to tell you this but I think this is information you should know.

Gary

kirin · « **Reply #21 on:** February 25, 2007, 06:42:42 PM »

DAMN!
That sounds super scary...
Would like to see it all in person!

egspot · « **Reply #22 on:** February 25, 2007, 06:48:27 PM »

Thanks Gary,

I went with the visual rust at the time and all the receipts from work done (considering that I was so eager to get one after 24 years without one.) Since it was a lady, I assumed that the shop that had done the work was on the up & up. Every other VW that I ever owned was in a part of the world (Puerto Rico and Hawaii) where that degree of rust is unheard off.

I am more aware of the local scene now and have passed on more projects as I got one that I probably will not be able to finish and have no clue what it would cost if I was to pay for it. I have also inquired about replacement VWs. However with my lack of mobility I probably need help to ensure they are structurally sound. I have a buggy, a van, and a 68 Beetle in mind at this point.

GRK · « **Reply #23 on:** February 25, 2007, 07:27:52 PM »

Quote

DAMN!
That sounds super scary...
Would like to see it all in person!

Tommorow is your last chance to see it . Hans is breaking it into pieces and putting it in his cube trailer for scrap on Mon.

Gary

Hansk · « **Reply #24 on:** February 26, 2007, 07:20:48 PM »

So today I disposed of the shell. Once the roof was off I was able to simply rip the front half of the car off the pan by hand, nothing holding it on but silicone and rust. The rear half only required the bolts across the rear of the pan to be removed and rip.....off it came , replacement heater channels stayed complete and on the pan and did not seem to be attached to the car at all. Wait .... there's more , now for the pan halves , same thing , fully removed by HAND !! No cutting or grinding. There was really nothing holding that car together.

Emilio , I have a big box full of all the little parts and pieces which you may be able to apply to your 66 project or ..... , also still up for grabs wheels & tires , gas tank , rear & side glass , right front fender , bumpers........

egspot · « **Reply #25 on:** February 27, 2007, 02:31:25 AM »

Quote

So today I disposed of the shell. Once the roof was off

66vdub · « **Reply #26 on:** February 27, 2007, 04:09:13 PM »

hey just wonderin if u got the headlight assemblies still? if so wat is included in them? thanks

egspot · « **Reply #27 on:** February 27, 2007, 06:31:06 PM »

Quote

hey just wonderin if u got the headlight assemblies still? if so wat is included in them? thanks

As far as I know there was no damage to them.

Please e-mail Hansk on this forum.

See above.

egspot

egspot · « **Reply #28 on:** March 04, 2007, 03:38:26 PM »

bump

egspot · « **Reply #29 on:** March 10, 2007, 06:49:07 PM »

Two headlight assemblies the pair PENGING

Wide 5 Chromies, Two in good shape (another I am not sure) 5.5x15 with 195 60 15 and two 4.5 X15 with 145 15 (purchsed on the last days of Airspeed) wheels and tires PENGING