Author Topic: Beam Adjusters Instalation (Read 1413 times)

love loaf · « **on:** April 09, 2006, 06:32:30 PM »

is there anywhere in the lowermainland that will install adjusters on my beam? or... anyone out there that wants to do it for me or help me do it. i know its not realy a hard project but i dont have a welder. and i tend to be lazy

thanks

Kevin \"the loaf\"

notchback · « **Reply #1 on:** April 09, 2006, 07:54:38 PM »

For what kind of vehicle

love loaf · « **Reply #2 on:** April 09, 2006, 09:15:20 PM »

oh yah! its a 66 bug. stock ball joint front.

also....it is a baja with a one piece front end. so it can be taken right off. would it be possible to do it without taking hte beam out of the car. not that thats much harder.

love loaf · « **Reply #3 on:** April 15, 2006, 08:44:01 PM »

bump

rustybus · « **Reply #4 on:** April 15, 2006, 08:52:56 PM »

The beam must come out and be totally stripped down. Alest thats how I would it

notorious B.U.G. · « **Reply #5 on:** April 16, 2006, 07:46:31 PM »

You will have to remove the beam, pull the spindles and trailing arms off and then pull out the torsion leaves. You can leave the steering box on the beam. If you remove and deliver the beam and can leave it for a couple of days, I'll do it for you for $50.

It must be clean though ie: spray it with engine degreaser and pressure wash it at a car wash before you drop it off. If it's covered in grease the cost is $100!

I live in Langley. If you are interested PM me.

Chris B