AirSpeed VW Community Forums
Technical => Restoration, Preservation & Body work Forum => Topic started by: Forum Master on July 04, 2003, 02:08:28 PM
-
I've bought a 67' sunroof bug and was wondering if there was any other way to prep under the rear window louvers for painting, without cutting out that vent piece totally?
-
This one requires alot of patience. The best results we've had are by simply using a compressed air blower, cleaning as thuroughly as possible. Next remove as much loose material (rust or old paint) with a flat screwdriver, reaching between the vents. If you're lucky, the car won't have much paint in this area if it's been re-painted in the past. Aterwards a 3M scotch-brite pad can be used to prep the area, manouvering with a screwdriver or similar tool. A wipe with a shop towel soaked in wax & grease remover will leave a decently prepped surface. Also warn eveyone around not to annoy you. Tell them you have a sharp screwdriver in you hand... :o