AirSpeed VW Community Forums

Technical => Brakes Forum => Topic started by: Boost_Retard on November 05, 2005, 10:07:44 AM

Title: Bruce, Wanna Cross Drill My Rotors?
Post by: Boost_Retard on November 05, 2005, 10:07:44 AM

If there is anyone that can cross drill a set of italian 73-79 type 2 front rotors for me, please let me know.
send me a PM or please reply to this post..

i will give you a call and drop them off.

thanks
Cale

Title: Bruce, Wanna Cross Drill My Rotors?
Post by: Bruce on November 05, 2005, 12:06:29 PM

Do the rotors have radial vents?  What is the OD of the rotor?  ID?  
My template fits KG/Type3/Porsche 914 rear rotors.

Title: Bruce, Wanna Cross Drill My Rotors?
Post by: Boost_Retard on November 05, 2005, 03:03:05 PM

the rotor is a brembo 73-79 type 2 front rotor, it has 11\" OD 5X112 bolt pattern
i have no means of measuring the thickness of the rotor..or the ID at the moment..but then minimum thickness is 11mm..so im guessing its around 12mm..

when i get the actually #s i will post them

Cale

Title: Bruce, Wanna Cross Drill My Rotors?
Post by: Bruce on November 05, 2005, 09:51:37 PM

Since it is 12mm thick, that means it is solid.  Since it is solid, I can drill it.  All I have to do is make sure my template will work.