AirSpeed VW Community Forums

General Forums => Classifieds => Topic started by: riff raff on February 28, 2012, 04:51:26 AM

Title: 22mm Link Pin and Roller Cage Needed
Post by: riff raff on February 28, 2012, 04:51:26 AM

Discovered one seized link pin and badly corroded roller bearing cage (late split bus beam with 22mm link pins) on the beam I am putting together for Daisy, the Humboldt Co-op Single Cab.
Anybody have a good used single link pin (or two) and roller cage(s) they could part with?
Could also use a half dozen shims as several of these are pooched.
Thanks

Title: Re: 22mm Link Pin and Roller Cage Needed
Post by: billybob57 on February 28, 2012, 08:16:14 AM

Got my spindles back from Wagens West and in a bag was my Link Pins and Needle bearings
One of my Bearings was broke apart and the rollers were in a pile..:(
i emailed Nate and he sent me 1 brand new roller bearing cage and a cpl of washers...
couldnt hurt to email him and see if he has any spares forsale...Good Luck!     Bill