AirSpeed VW Community Forums
General Forums => Air Speed Lounge => Topic started by: moser11 on January 19, 2012, 09:48:05 PM
-
I just started working on a 56 project...and fitting the rear fenders for the first time (of many) i notice that the front side of the fender hangs down quite a bit further than the bottom of the heater channel. Probably 2.5 - 3 " ..I noticed in some of the build threads namely the amazing 54 in the members section that his car seams to be very close to flush with the bottom of the pan..are these cars the same in that area? the po put channels in this car but they COULD be wrong... any assistance would be much appreciated..I apologize in advance if this is the wrong area to post....I'll figure it out..Thanks
oh ya the rear fenders are the originals...
-
post a couple pics if you can....very possible someone could botch heater chanel fit with how rusty cars can get back there
-
although the front, is it like this?
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fimages.thesamba.com%2Fvw%2Fgallery%2Fpix%2F641636.jpg&hash=547f446ded688747141c2d9fc7d7eecdc4e8e033)
-
thanks for the help..I will get some pics and post them up..(I hope).... Josh your car is inspiring... thats about all I can say....awesome
I couldn't imagine doing a build without the internet...
once I get some time tonight i will get some more info thanks
-
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fimages.thesamba.com%2Fvw%2Fgallery%2Fpix%2F403046.jpg&hash=a3a0e2ef0cbaf48c943ee5aae7ce76133a0a1813)
-
Oldie too...
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fimg3.imageshack.us%2Fimg3%2F6003%2Ffenderbottom.jpg&hash=28c89dc83511e87f48bc1257c00de456af594ef3)