AirSpeed VW Community Forums

General Forums => Classifieds => Topic started by: beetlemandan on June 11, 2011, 06:44:05 PM

Title: bus swingaxel with reduction boxes WANTED!!!
Post by: beetlemandan on June 11, 2011, 06:44:05 PM: well? anyone got one that can be stuffed into my '68 baja?
Title: Re: bus swingaxel with reduction boxes WANTED!!!
Post by: vwguy on June 11, 2011, 07:10:42 PM: PM sent
Title: Re: bus swingaxel with reduction boxes WANTED!!!
Post by: donagh on June 13, 2011, 03:57:49 PM: I have full rear end out of a 61 bus, tranny was fine and the reduction boxes were all rebuilt a few years proir to convering, I also have the brakes. If interested call me 604-626-2233.
Title: Re: bus swingaxel with reduction boxes WANTED!!!
Post by: beetlemandan on June 13, 2011, 08:28:39 PM: where are you at and what do you want?at this point, location and quality is more important to me
Title: Re: bus swingaxel with reduction boxes WANTED!!!
Post by: donagh on June 14, 2011, 03:23:19 PM: 350 for everything, tranny brakes, reduction boxes, its missing the nose cone but everything worked proir to removing, including the brakes, it came of a low miles us import so no rust. I'm in vancouver but could probably get it shipped to the interior if you could pick up at the depot in Kellowna for very little.

Its stored at my work in the warehouse, if you are interested I'll pull it down and take some pictures.
Title: Re: bus swingaxel with reduction boxes WANTED!!!
Post by: kris on June 14, 2011, 05:39:48 PM: I am up near vernon with a split case tranny and big nut gear reduction boxes. give me a call at 250 308 7756
Title: Re: bus swingaxel with reduction boxes WANTED!!!
Post by: beetlemandan on June 15, 2011, 01:57:12 PM: Quote from: donagh on June 14, 2011, 03:23:19 PM
350 for everything, tranny brakes, reduction boxes, its missing the nose cone but everything worked proir to removing, including the brakes, it came of a low miles us import so no rust. I'm in vancouver but could probably get it shipped to the interior if you could pick up at the depot in Kellowna for very little.

Its stored at my work in the warehouse, if you are interested I'll pull it down and take some pictures.

will the nose cone off my 68 fit and work?
Title: Re: bus swingaxel with reduction boxes WANTED!!!
Post by: donagh on June 16, 2011, 10:45:37 AM: Sorry, no idea if it would work with a 68, anyone?

I also have a new master cyclender that comes with the package
Title: Re: bus swingaxel with reduction boxes WANTED!!!
Post by: riff raff on June 18, 2011, 12:57:49 PM: A nosecone off a 68 Type 1 will work on the transaxle, but it depends if the rail is set up for the Type 2 or the Type 1 nosecone.
The hockey stick comes out at a different place on the two different nosecones so it depends where the shift rod is in the rail.
Title: Re: bus swingaxel with reduction boxes WANTED!!!
Post by: beetlemandan on June 19, 2011, 08:17:15 PM: Quote from: riff raff on June 18, 2011, 12:57:49 PM
A nosecone off a 68 Type 1 will work on the transaxle, but it depends if the rail is set up for the Type 2 or the Type 1 nosecone.
The hockey stick comes out at a different place on the two different nosecones so it depends where the shift rod is in the rail.

its a 68 baja with the OG swingaxle. i'm going to assume that means i just replace my OG nose cone and hockey stick onto the donor bus swingaxle?