AirSpeed VW Community Forums
General Forums => Classifieds => Topic started by: 66DB on May 11, 2011, 01:43:35 PM
-
Pair of 15x10 Baja wheels, brand new in the box NEVER been used or mounted. They're $100 each @cip so $130 for the pair is fair?
Flat side pods for a dune buggy (see pic below) great for an offroad buggy - $40
King and link steering box, has a little play (could be adjusted? - I just put in a new spare I had lying around) and the pitman arm was drilled out for 1/2" tie rods - $30
Lots of random engine bits, carbs, shrouds, intakes, starters, fuel pumps. Other - swing axle torsion bars and plates, backing plates (I'm pretty sure they're all rear), stock 4bolt and 5bolt wheels - Tell me what you need I might have it, make an offer just need it gone
Pic is of side pods only not the wheels or buggy
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi478.photobucket.com%2Falbums%2Frr142%2Fthebuggyproject%2FThe%2520Street%2520Buggy%2Fn1422563678_30136715_8726.jpg&hash=df2bf30be4ffab0a985eb1110c8c99a5f6cb9c6c)
-
Are the baja wheels 4 or 5 bolt? Do you have a picture?
-
Hi ,looking for backing plates for a link pin front end . Thanks Ace 604-533-6722
-
Are the baja wheels 4 or 5 bolt? Do you have a picture?
Oops forgot that. They are 5 bolt and are white. They are the ones from CIP:
http://www.cip1.ca/ProductDetails.asp?ProductCode=ACC-C10-1018
Hi ,looking for backing plates for a link pin front end . Thanks Ace 604-533-6722
I'll have to go take a look to see which ones I have exactly, I'll give you a ring if I find link pin plates
-
What year are the spring plates and torsion bars?
-
I'm not actually sure what year they are, they came off the buggy when I converted to IRS. They are for a swingaxle trans - is there a difference between years, or is there a way to check?
-
Bump