AirSpeed VW Community Forums
General Forums => Air Speed Lounge => Topic started by: Geoff on May 13, 2004, 09:35:37 AM
-
Just wanted to see if anyone knows if this fridat (test'n tune? high school drags) is open for reg street cars and when tech closes? I'd like to take the Oval out IF everything go's as planned today.
Motor and Trans are in and it's ready to fire :o
Cant wait!
-
Not sure about friday but Wayne and them are running this weekend.
-
I am going , as far as I understood, it is test n tune and street legals. We are going to be there for 5:30
Kevin
-
Well the Oval is alive and running well! I'm ready to go out if i can get out of here early.
-
I will be there around 5:30pm for the night drags :D
-
The Mission web site shows no street legals tonight, can we show up and race on a test and tune night?
-
You must be looking at the wrong web site. The one I looked at had this under the month of May in the schedule:
14--- MOPAC Performance-fri-night street legal
-
The Mission web site shows no street legals tonight, can we show up and race on a test and tune night?
may
1&2--- road course (sports car club of b.c.)
6--- Thursday track rental for NHRA class cars&Super pro, W/E competitors only
7/8/9--- Lordco B.C. Nationals, NHRA,Lucas Oil divisional race series
10--- (LODRS-rain date)
14--- Friday-t&t rental /high school
14--- MOPAC Performance-fri-night street legal
15&16--- (B 2)Brackets(ET Challenge#2-Sat)+ CPSA,D/S,S/SH,H/R,S/G,S/ST (NO TESTING)
21--- MOPAC Performance-fri-night street legal
22&23--- road course
28--- Friday-t&t rental
29&30--- CMDRA-all bike drags &(motocross)
-
Great, I should be able to make it. You going out again Bruce?
Anyone else?
HoosierDaddy?
Pointblank?
-
Be there on the 21!
-
21st I am in also.... DGLVK night ....
Brian 21st???
Danny???
James wanna come watch??
:D
-
I might have to, Jim and Geoff have my fate in their hands - My header is out for coating.
-
its gonna be close for me... we will have to see
i need a few things before tech will let me through.... like less oil leaks lol
-
James, If your header is not ready i'll lend you one of my old ones......no backing out!
-
lol, you just took away his exuse! now he actually has to get it working
btw james hows the tan errrr i mean work coming?
-
Just got back from the Cactus Club for ummmmm \"research\" GREAT view at the one on Pemberton in North Van!
Hey Geoff..... SHUT UP!
-
Ill be there for the 21st. James, bring a cushion. Those bleachers are not very forgiving on the ol buttocks! ;)
-
I'll just sit on your trailer Brian :P
-
If you get cold you can sit in my trailer.. Fully insulated... Do I need to bring the TV???Incase you get bored?? :P
-
Just got back from the Cactus Club for ummmmm "research" GREAT view at the one on Pemberton in North Van!
Hey Geoff..... SHUT UP!
i can throw a baseball from my front door and hit that cactus club!! a VERY nice view indeed :D
-
So what happened last night?
-
Brad and I drove out from Airspeed at 4pm, We went the route we will take on the \"Real VW street car shoot out\" It took 45 min to the track and we drove at a average speed of 40-45 mph (with a few spirts of 80-90mph :-)
All and all a nice drive and should be good for everyone.
As for the track times, On the the way in i had a shudder in the motor and a miss that i couldn't track down. Checked a few things but just decided to run it. First pass was a 12.45 @ 105 ish Then the motor started to run worse.
Second pass it started to stall and idle bad, ran a 12.57 i think
Third pass it popped out of first when it wheelied and the BMW beside me pulled out in front, jammed it in second and ran it out only passing the BMW by a car length or so at the lights 14.47
Fourth pass, Good wheelie but still running bad. Ran a 12.54 @ 106
Turns out the intake manifold gasket had sucked in covering one intake and allowing a bad vacume leak.
Oh well, better luck next time.
Brad ran 12.90 100mph and had some traction problems. He may have hurt his trans, we'll find out this week.
Bruce T had some nice wheelies but broke his CV on the third pass , he had that fixed quick.
I have a nice pic of a mullet from the track, i'll post that later.
G.
-
:rockon: :rockon: :rockon: :rockon:
-
:mullet:
-
Bruce are you still running stock deburred T1 cv's?
You yanked the wheels atleast 8\" off the ground before your cv broke. I didn't know your car could do that. It was impresive
Kevin
-
Kevin, did you see my first pass? I think I got them higher than any other time.
Still got Bug CVs in it. I deburred the cages when I installed them 12 years ago. The right one has never been apart. I busted a CV about 5 yrs ago leaving me with 3 deburred CVs. I don't remember which one it was, but it was on the left side like Fri night.
-
So Bruce has been de-throned
;)
-
Yep, but I'm still on the podium at #3, and we're half way through the street schedule so far this year. I'm beginning to think this \"Hulk\" thing is just a big myth. Another car that doesn't exist!
Special thanks go out to Stephan who was willing to get his hands dirty and help me change the CV joint.
-
Don't listen to them Hulk! Take it slow, no one wants a dead show off! ;)
-
No worries GMB... Wont take much to beat a super Beetle...
:huh:
-
No worries GMB... Wont take much to beat a super Beetle...
:huh:
hey, I've seen 300+ horsepower beetles run 15's in the quartermile.
missed a shift, spun all through the gears, foot slipped off of the pedal, really bad reaction time etc...
so till anyone else runs anything, bruce is still #3!!! :P B)
Stephan
-
Just for everyones \"FYI\" Bruce's car is a Std beetle....NOT a super. :rolleyes:
-
And remember. Its not the fastest car that wins the race. Its the one that actually shows up and finishes.
-Kirin
-
speaking of that kirin...
my cars not gonna make it out
lol motors comin out, front suspension is coming out
and i still have a rustfalia to get running
but on a plus note my car does wicked doughnuts!
-dan
-
No worries GMB... Wont take much to beat a super Beetle...
:huh:
Who has a Super Beetle?
-
Kidding..... I am trying to goat you ;)
-
I am trying to goat you
lol. is this some type of hug-thing again? or you trying to goad bruce... :lol: :P
-
Kidding..... I am trying to goat you ;)
gotta wear the velcro gloves for that, shane :huh:
-
That is for my sheep the velcro gloves........ :P and dont for the rubber boots so they dont run away