AirSpeed VW Community Forums

General Forums => Air Speed Lounge => Topic started by: Alp on January 18, 2010, 11:58:38 AM

Title: rubber mat
Post by: Alp on January 18, 2010, 11:58:38 AM

looking to get a rubber mat for the bed of my truck.  Any ideas where to get one?  It needs to by 5X6 and about 3/4" thick. thanks

Title: Re: rubber mat
Post by: Alisdair on January 18, 2010, 12:50:59 PM

western supply in chilliwack , old canadian tire building . horse stall mats . 3/4 inch thick and i think they come in a few different sizes .  cheap too , and they take a shit kickin  ... pun intended !      or check your local farm supply store .    

Title: Re: rubber mat
Post by: Alisdair on January 18, 2010, 12:58:02 PM

http://www.countrywestsupply.com/Country_West_Supply/CWS_Stall_Mats.html

there new address will be here  somewhere . ^^^^^

Title: Re: rubber mat
Post by: Chris E. on January 18, 2010, 01:28:54 PM

Goodall Rubber on 96 ave in Port Kells.

Title: Re: rubber mat
Post by: orangecrush on January 18, 2010, 01:55:46 PM

... Western Rubber Mats in Abbotsford ...


Rob

Title: Re: rubber mat
Post by: Alp on January 18, 2010, 02:08:22 PM

thanks I will check into these places.

Title: Re: rubber mat
Post by: BUSDADDY on January 18, 2010, 05:16:56 PM

Industrial plastics and paints in Langley has them, maybe the Coq. store does too.
http://www.ippnet.com/locations.html

Title: Re: rubber mat
Post by: nivag on January 18, 2010, 07:27:47 PM

Try Midland liquidators on kingsway/knight st area. 

Title: Re: rubber mat
Post by: Alp on January 18, 2010, 08:22:04 PM

went to Midlands a week ago but didn't see anything.

Title: Re: rubber mat
Post by: GRK on January 18, 2010, 09:20:20 PM

Hi LIte truck accessories on the Langley bypass has them or a place on Scott road at the bottom of the hill across from the ralphs wrecker.
I think their called west coast canopy I have bought lots of matts for under vending machines there.

Gary

Title: Re: rubber mat
Post by: Alp on January 18, 2010, 09:34:49 PM

most places have mats that are precut to either truck boxes so they have wheel wells (mine doesn't) or the boxes are a different size (mine is 5X6).  I will try the tack shops tomorrow.