AirSpeed VW Community Forums

General Forums => Classifieds => Topic started by: Silverblade on April 18, 2008, 06:46:48 PM

Title: WTB: wide 5 to narrow 5 adapters
Post by: Silverblade on April 18, 2008, 06:46:48 PM

Hey guys, I am looking for some adapters to bolt up my narrow 5 bolt rims to the wide 5 on my dune buggy. I have a set right now but they are aluminum or something else, they are really light, I am looking for some steel ones because it is going to be beaten on lol.

Also, aluminum wide to narrow 5 adaptors for sale lol.

Title: Re: WTB: wide 5 to narrow 5 adapters
Post by: ScreamnStroker on April 18, 2008, 08:32:09 PM

Narrow 5 as talking chevy lug pattern or small buss patern?

Title: Re: WTB: wide 5 to narrow 5 adapters
Post by: Silverblade on April 22, 2008, 06:32:46 PM

Hmm that is a good question. I found my buddy a manx that had the knock off torque thrust 2 rims on it and took them as a finders fee, so I am not really sure. They were bolted onto it though, cant remember if there was adapters or not. I will measure my rim tonight or tomorrow and get back to you. Which one do you have? thanks.

Title: Re: WTB: wide 5 to narrow 5 adapters
Post by: Silverblade on April 22, 2008, 06:41:00 PM

I dont know if it helps but they measure 2.75"s from the inside of one bolt hole to the inside of the bolt hole beside it, and 4.5"s from one hole to the third hole, as in top center to bottom left in a star position.

Title: Re: WTB: wide 5 to narrow 5 adapters
Post by: ScreamnStroker on April 22, 2008, 11:11:15 PM

if they were bolted onto a torque thrust rim, its either ford or chevy pattern

Title: Re: WTB: wide 5 to narrow 5 adapters
Post by: Silverblade on April 23, 2008, 08:25:55 PM

they are "keystones" rims, knock off TT2s