AirSpeed VW Community Forums

General Forums => Classifieds => Topic started by: westcoast-paul on April 09, 2008, 09:07:36 AM

Title: Trade My Lp 2" Narrowed Cb Beam For Your 2" Bj One
Post by: westcoast-paul on April 09, 2008, 09:07:36 AM

i have this one sitting around my shop from a past project.  

Totally stripped to bare metal, CB Beam with needle bearings and Puma adjusters, CB torsion bars, new seals, new grub screws / nuts, bare metal trailing arms (4), stock carriers, stock spindles (not mounted).  Needs new link and king pins (or use your spindles).

I have a Ball Joint-based project now and would like to see if someone has a setup to swap that is maybe in the same boat as me.

drop me a note if interested.  Thanks.

Title: Trade My Lp 2" Narrowed Cb Beam For Your 2" Bj One
Post by: josh on April 09, 2008, 12:07:35 PM

still got that stock width one if you want to narrow it, even have a new set of needle bearings to put in after you're done

Title: Trade My Lp 2" Narrowed Cb Beam For Your 2" Bj One
Post by: westcoast-paul on April 09, 2008, 01:14:48 PM

thanks Josh.  I currently already have a stock width adjustable in the project.  It's just i have no need for the LP one and would be easy / fast to swap a full assemble.

Title: Trade My Lp 2" Narrowed Cb Beam For Your 2" Bj One
Post by: josh on April 09, 2008, 07:54:18 PM

gotcha