AirSpeed VW Community Forums

General Forums => Air Speed Lounge => Topic started by: Geoff on February 25, 2004, 02:42:12 PM

Title: Drag Bars Are In Stock!
Post by: Geoff on February 25, 2004, 02:42:12 PM
AirSpeed is  proud to announce that both early and late \"Drag Bars\" are now in stock! Everyone who has been on the waiting list we have yours put aside. Everyone else..... give us a call or drop in as they will go quick!
Either kit only $349.95 CDN $274.95 USD

Early version,
*This unit is built for all beetles that have the \"Straight\" rear shock towers.
*100% bolt in!
*All Aluminum construction
*Internal Hiem joints on upper bar
*Down bars machined for 19mm wrench to ease adjustment
* Comes with shim pack for adjustment (if using limiting straps, straps sold separately)
*CNC construction
*Quality Hiem joint built for maximum load
*Airspeed CNC engraved logo's
*Chromoly lower support brackets
(We recommend the use of the aftermarket bell housing mount as the stock mount is weak)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fftp%3A%2F%2Fftp_geoffp%3Aairgeek69%40airspeedparts.com%2Fimages%2Fspeed-bar-1.jpg&hash=6860439dc3e70be49def01091bad89d869da1e0f)

(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fftp%3A%2F%2Fftp_geoffp%3Aairgeek69%40airspeedparts.com%2Fimages%2Fspeed-bar-3.jpg&hash=db49fa8b72ad508453e0087e3f0bac221509f2e0)

(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fftp%3A%2F%2Fftp_geoffp%3Aairgeek69%40airspeedparts.com%2Fimages%2Fspeed-bar-4.jpg&hash=d19309602aa76df898f0612d1726ddfcd940035e)
Late Drag Bar
*This unit is built for all beetles that have the \"Angled\" rear shock towers.
*100% bolt in!
*Chromoly & Aluminum construction
*Tig welded chromoly joints on upper bar
*Down bars machined for 19mm wrench to ease adjustment
* Comes with shim pack for adjustment (if using limiting straps, straps sold separately)
*CNC construction
*Quality Hiem joint built for maximum load
*Airspeed CNC engraved logo's
*Chromoly lower support brackets
(We recommend the use of the aftermarket bell housing mount as the stock mount is weak)

(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fftp%3A%2F%2Fftp_geoffp%3Aairgeek69%40airspeedparts.com%2Fimages%2Flate-drag-bar-3.jpg&hash=a10ef9c74027bf0e319f47e93296cbcf4e8e1756)

(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fftp%3A%2F%2Fftp_geoffp%3Aairgeek69%40airspeedparts.com%2Fimages%2Flate-drag-bar2.jpg&hash=f7b7cdcfc1b6d8609c2dfa71b7a13bdcba717c55)

(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fftp%3A%2F%2Fftp_geoffp%3Aairgeek69%40airspeedparts.com%2Fimages%2Flate-drag-bar1.jpg&hash=9dbf8705d1c3355c32d5f7556e1e6eb2ad6053f9)
 
Title: Drag Bars Are In Stock!
Post by: James Buchan on February 25, 2004, 03:51:45 PM
WOOOHOOO I'll be in Saturday
Title: Drag Bars Are In Stock!
Post by: Geoff on February 25, 2004, 05:57:36 PM
James, Yours is here waiting for you, Kirin yours is ready and waiting as well :rolleyes:  
Title: Drag Bars Are In Stock!
Post by: James Buchan on February 25, 2004, 06:01:17 PM
Yup I called Jim to make sure my fittings were going to be in as well.
Title: Drag Bars Are In Stock!
Post by: kirin on February 25, 2004, 11:07:32 PM
Why the roll eyes!? Oh wait I don't have a tranny yet :(  
Title: Drag Bars Are In Stock!
Post by: red snapper on February 26, 2004, 08:25:48 AM
Not trying to be a suckhole or anything but I Got my bar in the other day. Looks awsome. Thanks Russ for the powdercoating. Its almost ready to go, Just waiting for James!