AirSpeed VW Community Forums

General Forums => Air Speed Lounge => Topic started by: jim martin on June 04, 2007, 09:39:32 PM

Title: How To Clean Ceramic Coatings
Post by: jim martin on June 04, 2007, 09:39:32 PM

anyone have any experience/tips cleaning ceramic coated exhaust's.
i have some heavy burned oil stains i would like to remove before it goes on

Title: How To Clean Ceramic Coatings
Post by: josh on June 04, 2007, 09:47:02 PM

no experience but read guys use 00 steel wool, then hit it with some mothers mag polish

Title: How To Clean Ceramic Coatings
Post by: dannyboy on June 04, 2007, 10:30:31 PM

mothers mag polish is what has been reccomended to me aswell
 

Title: How To Clean Ceramic Coatings
Post by: Geoff on June 04, 2007, 10:47:17 PM

I used Autosol, almost the same as mentioned above

Title: How To Clean Ceramic Coatings
Post by: G-dog on June 05, 2007, 08:13:49 AM

Quote

no experience but read guys use 00 steel wool, then hit it with some mothers mag polish

You need 0000 steel wool ,00 is too coarse .Put some Autosol\ Mag polish right on the steel wool, to clean the goo off,then polish it with the Autosol and a cloth.

Title: How To Clean Ceramic Coatings
Post by: jim martin on June 05, 2007, 04:48:32 PM

great !!
now i hope my wife doesn't take it the wrong way when i say i'm going outside to polish my pipe :D  

Title: How To Clean Ceramic Coatings
Post by: flat4 on June 07, 2007, 06:24:24 PM

I used wd40 and a 3m scotchbrite pad, and it worked fine.