AirSpeed VW Community Forums
Project Forums => ASF Member Projects => Topic started by: Geoff on January 26, 2004, 10:03:42 AM
-
This past Sunday my friend Bruce and I did a front end swap in the white panel van. We instaled a adjustable beam to get it down and a give it a small rake until i lower the back and instal some wheels.
Before pic...
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fftp%3A%2F%2Fftp_geoffp%3Aairgeek69%40airspeedparts.com%2Fimages%2Ffruitopia10.jpg&hash=66ae73cdc33142ccd22f3fce29046097c18fec7e)
beam is out and ready to swap parts
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fftp%3A%2F%2Fftp_geoffp%3Aairgeek69%40airspeedparts.com%2Fimages%2Fwhite-bus-beam-out.jpg&hash=76ca5d300a97aac48f2d1023fc3ff1ddbb2a9ab7)
here it is with the beam out.
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fftp%3A%2F%2Fftp_geoffp%3Aairgeek69%40airspeedparts.com%2Fimages%2Fwhite-bus-underneath.jpg&hash=cf199cb3e718f4dc79668a2b3b06518fe8aa6f1c)
and all done! Looks much better now.
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fftp%3A%2F%2Fftp_geoffp%3Aairgeek69%40airspeedparts.com%2Fimages%2Fwhite-bus-lowered.jpg&hash=e73efc0fa58c9727446addb88d750b8fe72e225d)
-
much much better geoff!
Stephan
-
I need one of those beams!!!!
-
nice bus geoff. i have the same can; 79, white, panel. i'll be following your progress...
-
Thanks Kombikruiser, This one is more my work bus but i will fix it up with some wheels/tires and lower it a little more. My main project is the 69 panel with the 2.7L 911 motor, that one will be my keeper :P
-
Once Speedy is on the road whats going to happen with the fruitopia van?
-Kirin
-
I want it, or the beam at least! :rockon:
-
Once the 911 Panel is done i may sell the white bus or keep using it for the AirSpeed shop truck. Looks like i will put some 911 wheels on it this week and the new Airspeed large logo's
-
Once the 911 Panel is done i may sell the white bus or keep using it for the AirSpeed shop truck. Looks like i will put some 911 wheels on it this week and the new Airspeed large logo's
thats awesome geoff.
keep us updated!
2.7L 911 SC motor or the 911RS motor? those 911RS's are RARE!
Stephan
-
Are you hiring? Someone needs to drive that van around during the day dropping off parts and stuff! :rockon:
-
Not hiring at the moment but we may in the Spring.
as for the motor, It's a 1976 2.7L (not a RS) somewhere around 170-180hp with emissions and FI. I have upgraded to tripple Weber 48 ida's and header to try and get somr more HP.
-
Sounds like a fun set of wheels! :rockon: If you ever need a hand working on it, I can try and help. :unsure:
-
Thats rad man. I have a 69 that im lookin at putting either a rake on... or lowering all together... what all did you need to do to lower the front ... how much did that set you back?
-
I say slam it down!
-
Be a man Geoff,, we wanna see another sump Bumper!!!
-
B Easy, The front lowered beam is $549, That will allow you raise or lower your front end to the height you like.
OR you can buy just the adjusters and instal them yourself but you do need some special tools.
Since that pic was take the back has been lowered as well and now looks much better.
Here is a shot from Sept on the way to California.
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2F66.147.224.84%2Fgallery%2Falbums%2Fuserpics%2F10002%2Fnormal_border-bus.jpg&hash=884d4d126150a7a9bf7e8bfcbda2ef470e08e185)
Pointblank, The Blue van will be a Sump Bumper.....well it has a dry sump so I guess it wont hit but the case will :D
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2F66.147.224.84%2Fgallery%2Falbums%2Fuserpics%2F10002%2Fnormal_Speed-E-Aug24-2.jpg&hash=a7e17018081be6a8d779560ac4843e5542ec3504)
-
What's the cost on lowering my 76 bus?
-
:rolleyes: look at the post above ya
btw, i dont think that thats a very appropriate avatar there....
dont want ppl the get the wrong idea about you......
-
now now Danny!
-
:rolleyes: look at the post above ya
btw, i dont think that thats a very appropriate avatar there....
dont want ppl the get the wrong idea about you......
Like that would be installed... :rolleyes:
As for the avatar, if it offends you then don't look...
Or if you like I'll find one for the 'boy' :lol:
(btw thanks for all your help with my fuel injection/carb swap :wub: )
-
btw, i dont think that thats a very appropriate avatar there....
dont want ppl the get the wrong idea about you......
your avitar is upsetting.
it should be bigger. :P
-
Boy...Well you know, there's always one in the bunch that is offended!!!
Silas.... (no comment for you!!)
How's that?
-
avitar
it should be bigger. :P
sp :P
-
avitar
sp :P
-
avitar
sp :P
now now. no-one likes a spelling nazi.
especially a post whore spelling nazi. ;)
-
Huh? Me?
-
How come I can hear an airspeeder somewhere out there going\"Alllll-right. I like where this is going.. Giggity giggty giggity\"(Head bob)
-
btw, i dont think that thats a very appropriate avatar there....
dont want ppl the get the wrong idea about you......
btw as per our conversation...
-
hey is that avatar of you?!?!
-
I think I've seen those somewhere before.....
-
:lol:
-
hey is that avatar of you?!?!
you wish... but this one is for you!!!
-
you wish... but this one is for you!!!
What the he$$ is going on Dan???????? :o
-
A little to the left.... yeap right there....
-
I'm telling your mom Dan!
-
This chick is sick... :huh:
-
Well gentlemen I have been out of the loop for a whille I see Bus chick is back I thought yoou boys scared her away Welcome back :rolleyes: Now Has anybody met her in person yet as I agree the avtar is to say the least intresting though I'm not much into the pleasure pain thing anymore :lol: :lol:
LAter OUTKAST
-
I think I've met BusChick.....But it seems like her and DannyBoy got a special thing going on ;)