We've gotten a prototype of our billet beam retainer from the fabricators, and the exhaust has arrived from the ceramic coating shop, so let's have a peek...
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fwww.airspeedparts.com%2Fgarage%2Ftr56%2F060503-01.jpg&hash=a1c10d5485ac4d2c8921d7994db2ba6fc4a54b44)
In addition to looking great, ceramic coating adds years to the life of an exhaust system and helps keep the exhaust pipes from radiating heat.
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fwww.airspeedparts.com%2Fgarage%2Ftr56%2F060503-02.jpg&hash=cb52fee5490d6609e14630089c22f93e94e82cd2)
A big nasty exhaust makes a big nasty sound...
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fwww.airspeedparts.com%2Fgarage%2Ftr56%2F060503-03.jpg&hash=5a76df48753cd3818b0d3ae5962a2bd2c33087c1)
That little button on the collector portion of a header is a removable bung. You can take out the bung and screw in an 0[size=8]2[/size] sensor for engine tuning with an air/fuel ratio monitor.
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fwww.airspeedparts.com%2Fgarage%2Ftr56%2F060503-04.jpg&hash=ac3e9e07cd704dd72fa7f6d67697121665674190)
This is the Jamar aluminum beam installed. The king & link parts have been powdercoated silver, and you can see the red urethane bushings. Those are Carrera drag shocks, and that's a wide-five disc brake kit. All these parts are available from AirSpeed.
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fwww.airspeedparts.com%2Fgarage%2Ftr56%2F060503-05.jpg&hash=a06f629fb3075e1faa86c22bed1b53c666fc7ee5)
This is our billet beam retainer being test fitted. It will need a little material off the top for a perfect spacing match for the front body mounts.