Technical > Chassis & Suspension Forum
Removing stuck inner bearing on spindle
(1/1)
WhiteDonkey:
Hi all and thx in advance
I have a king n link front beam and the inner race for the bearing is stuck on the spindle .....I've soaked and heated.......still does not remove .....any tricks or ideas pls
jim martin:
Drill it then split it with a chisel
Bruce:
You should be able to clamp a bearing splitter into the groove between the bearing and the spindle. Then use a standard puller on the bearing splitter.
If that doesn't work, take an angle grinder and grind it at 12 O'Clock until it is super thin. Then hit it with a hammer and it should split.
Chris:
If he was running late and didn't get to it until 12:30, would it still work?
Navigation
[0] Message Index
Go to full version