AirSpeed VW Community Forums
Technical => Tool Rental Center => Topic started by: Herrlowlight on June 04, 2012, 01:16:12 PM
-
Looking to borrow a torque tool to remove the 36mm castle nuts on my rear drum.
Can exchange for beer.. will handle tool as if it was my own (will wipe off grease :) )
Trevor
-
If you can take it to Kal Tire or another tire shop, I towed my car there and they did it for free in a few minutes
-
Good suggestion.. I have to do the brakes (and install a motor) before I can do that. Might be easier to just buy a 36mm socket and borrow an impact gun
Trevor
-
No one has one of these to lend out?
-
I can bring you this style...
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi.ebayimg.com%2Ft%2FVW-Dune-Buggy-36mm-Axle-Nut-Removal-Tool-%2F00%2Fs%2FNDAwWDQwMA%3D%3D%2F%24%28KGrHqF%2C%21k8E8DvIBUbuBPEJRhyyEQ%7E%7E60_35.JPG&hash=9297c3c38fc4d1c1b1addb9bf7a52d4bf10fbca3)
...to the DVKK Sea to Sky Cruise this Sunday.
Let me know ahead of time, though, as I don't normally carry it with me.
-Dave
-
I can lend you one but i've done it twice and never got them back.
drop me a pm, it's in East Van.
-
I can bring you this style...
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi.ebayimg.com%2Ft%2FVW-Dune-Buggy-36mm-Axle-Nut-Removal-Tool-%2F00%2Fs%2FNDAwWDQwMA%3D%3D%2F%24%28KGrHqF%2C%21k8E8DvIBUbuBPEJRhyyEQ%7E%7E60_35.JPG&hash=9297c3c38fc4d1c1b1addb9bf7a52d4bf10fbca3)
...to the DVKK Sea to Sky Cruise this Sunday.
Let me know ahead of time, though, as I don't normally carry it with me.
-Dave
Thanks for the offer Dave, I have that unit... I'm looking for the one Geoff has for gland nut removal.
-
I can lend you one but i've done it twice and never got them back.
drop me a pm, it's in East Van.
Seriously? The bastards!!!
Thanks Geoff, I'm probably better off just buying one. Do you know if the CIP style are ok?
http://www.cip1.ca/ProductDetails.asp?ProductCode=ACC%2DC10%2D7036
-
Just FYI for all you bus guys with small nuts, the torquemeister doesn't work on your busses as the axle snout is too long.
-
I can bring you this style...
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi.ebayimg.com%2Ft%2FVW-Dune-Buggy-36mm-Axle-Nut-Removal-Tool-%2F00%2Fs%2FNDAwWDQwMA%3D%3D%2F%24%28KGrHqF%2C%21k8E8DvIBUbuBPEJRhyyEQ%7E%7E60_35.JPG&hash=9297c3c38fc4d1c1b1addb9bf7a52d4bf10fbca3)
...to the DVKK Sea to Sky Cruise this Sunday.
Let me know ahead of time, though, as I don't normally carry it with me.
-Dave
Thanks for the offer Dave, I have that unit... I'm looking for the one Geoff has for gland nut removal.
I have One of these!!!! :) Call if needed!