kevins return to the dub life

[CHEECH]

[70's Looker]

thanks dude! front end all welded back up now good and strong was gonna put in new bumper mounts but cip only shiped me 1 so gotta get the other and then we can line the apron up and weld up a crack in the hood and the front should be kosher! then onto the heater channels! just got the danish ones outta cip anyone use these before??

ps sweet polish job was done on the weekend as well, i will let whoever did it to take credit he just has to log onto airspeed and post! haha


 

[stefan]

leave me alone!

[silas]

mmmmm....sweet pole-ish pantine'er!!

....just got the danish ones outta cip anyone use these before??

did you get the deluxe ones or econo ones?

[70's Looker]

....just got the danish ones outta cip anyone use these before??

did you get the deluxe ones or econo ones?
[/quote]

   deluxe all the way! i figures its the closest ima gonna get to og shizznats without the holes in em unless i wanna look cali way but i mean thats to much work for good ol kevin 

[70's Looker]

would anyone be able to guess whats 2 1/4 inchs??

[CHEECH]

IIIIIII KNOW!!!!!!!!!!!!! Looks killer dood. I`m thinkin your spare tire well is gonna be lookin like mine in a hurry 

[silas]

would anyone be able to guess whats 2 1/4 inchs??

that's twice as long as my p@nis.

do you guys want to see some "pics or it didnt happen"...? cause i got 'em....

[70's Looker]

i dunno silas this thread kinda sucks! i think im just going to pm you and shawn the details for now on 

[Chris W]

i dunno silas this thread kinda sucks! i think im just going to pm you and shawn the details for now on 

2 guys talking about p$nis size in your thread is not helping dude. 

[vwboop]

   Mango Syndrome

would anyone be able to guess whats 2 1/4 inchs??

[Alisdair]

would anyone be able to guess whats 2 1/4 inchs??

clearance between front beam and ground perhaps ? 

[CHEECH]

BINGO!!!!!!!

[Chris]

thats way too much clearance, your not living close enough to the edge

[CHEECH]

  but that measurement was taken with stock tires on. Might be a bit lower once the 135`s are on it.

[85fastlane]

would anyone be able to guess whats 2 1/4 inchs??

clearance between front beam and ground perhaps ? 

Lose the 2, 1/4" sounds better!

[70's Looker]

would anyone be able to guess whats 2 1/4 inchs??

clearance between front beam and ground perhaps ? 

Lose the 2, 1/4" sounds better!

haha anything is possable when ya have little to loose, the fronts been mangled before why not again

on a side note after BP we were all in a working mood so i got the drill out and started on the spot welds heater channel on pass side is ready to come out now see danny boy it is a two day job lol ok well maybe three depends on how well the coronas go down tomorrow 


 

[stefan]

i,ll be there to supervise LOL

[70's Looker]

sooo after a long ass wait i got my new 3 inch wider fenders complete with square headlites and all the knick nacks hopefully get them lined up and together tomorrow on a side note does anyone have the think the vega tail lites kicking around ya know the little square kinds??? ill post up some pics wait no nevermind i wont!

[mizovalgrl]

awww....come on no updated pic's of this amazing project......very  curious about how far you have come.....

[BUSDADDY]

sooo after a long ass wait i got my new 3 inch wider fenders complete with square headlites and all the knick nacks hopefully get them lined up and together tomorrow on a side note does anyone have the think the vega tail lites kicking around ya know the little square kinds??? ill post up some pics wait no nevermind i wont!

Careful what ya wish for bro, I might be able to hook you up

[silas]

sooo after a long ass wait i got my new 3 inch wider fenders complete with square headlites and all the knick nacks hopefully get them lined up and together tomorrow on a side note does anyone have the think the vega tail lites kicking around ya know the little square kinds??? ill post up some pics wait no nevermind i wont!

vega tail lights are played out.

you need to get 12 teardrop tail lights and arrange 6 on each rear fender in the shape of a flower. duct tape a bullet signal lense in the middle of those and voila...

[stefan]

i think i have a whale tail kicking around! 

[CHEECH]

Hey Stefan... Thanks for the whale tail  We finally got around to puttin it on last night and were able to roll it out of the shop for a few pics....

[stefan]

thats awsome, i,m glad it worked for ya!

[70's Looker]

that is soooo what im looking at doing to this car!!

[70's Looker]

so ive left this one dead for awhile but by popular demand i will post up what ive been up to! ive got it back on the ground on its wheels and half assed brake set up i went with 944 brakes on all corners supplied from lanner at vdub engineering i just have to settle on what kinda roters i want and yes its low the other weekend when i rolled the car outta the shop to take these pics it got caught on a EXTENSION cord granted thats low but in all reality its to low to run in langley let alone vancouver so ive raised it up slightly i still only have 3 inch clearence but F-it thats the look i want hope you all aprove

[silas]

so ive left this one dead for awhile but by popular demand i will post up what ive been up to! ive got it back on the ground on its wheels and half assed brake set up i went with 944 brakes on all corners supplied from lanner at vdub engineering i just have to settle on what kinda roters i want and yes its low the other weekend when i rolled the car outta the shop to take these pics it got caught on a EXTENSION cord granted thats low but in all reality its to low to run in langley let alone vancouver so ive raised it up slightly i still only have 3 inch clearence but F-it thats the look i want hope you all aprove

BAMM!!!! that thing is so hot i had to quote the whole damn post all over again with the pictures!!! great job buddy!!!

as far as rotors go...talk to jim martin...i'm pretty sure he went with a Neal set-up and iirc...they've got a great product, good selection and are reasonably priced.

keep it up and let me know if you need an extra set of hands/eyes/ears/etc!!

[Chris E.]

Looks awesome!

[70's Looker]

considering a sell on this one....