Author Topic: Official 2010 gcvws swap thread (Read 7412 times)

Geoff · « **on:** July 21, 2010, 10:10:06 AM »

Ok guys and gals, it's that time again. Get your swap spots booked now at the pre reg page at www.gcvws.com we still have some spots but they are goin quick.

Post what you want, need or will be bringing.

Spots are $40 for a 20*20' max two vendors per spot

CHEECH · « **Reply #1 on:** July 21, 2010, 10:32:10 AM »

Looking for a decent passenger side running board with the wide trim on it.

vwboop · « **Reply #2 on:** July 21, 2010, 10:37:08 AM »

Bringing some green metal and whatever else I can find around the yard

rolls and pleats · « **Reply #3 on:** July 21, 2010, 10:40:44 AM »

I need an OG paint Delta green rear hatch for an early baywindow, rear hatch seal for baywindow, sliding door seal for bay, drum to drum 64-67 split bus beam

vwboop · « **Reply #4 on:** July 21, 2010, 11:10:21 AM »

I need two sets of 60/40 front seats for late split busses in useable condition, Rear split bus bumper (pointed end - 66/67), 66 and earlier rear bus seat, a truck rear gate, rear wheel well arches for a late split bus, hoops/canvas for a SC or DC....etc...

bwaz · « **Reply #5 on:** July 21, 2010, 11:48:36 AM »

Wanted: early beetle floor mats, "L" luggage brackets, flat top distributor cap, emergency brake boot, 4 bolt wheel cylinders.... used ok as long as they're rebuildable, oval style dash glove box for my Zwitter....

BUSDADDY · « **Reply #6 on:** July 21, 2010, 12:41:10 PM »

Quote from: CHEECH on July 21, 2010, 10:32:10 AM

Looking for a decent passenger side running board with the wide trim on it.

Haha that's funny, I need a decent drivers side running board with wide trim on it, preferably German for a patina car.

bwaz · « **Reply #7 on:** July 21, 2010, 12:50:17 PM »

Could have picked up a decent pair for CHEAP in Seattle last weekend at the Saturday swap meet

Crank · « **Reply #8 on:** July 21, 2010, 02:00:31 PM »

I am looking for:

Correct for 58 Bus
Front wheel wells - (the section under the seats) both sides.
~~Bosch VJ4 BR8 Distributor~~
~~Coat hooks for a 58 bus (3 of them)~~
Original door handles for Cargo and rear hatch. (with keys?)
Horn center piece (whole mechanism -button, chrome ring, outer ring)
Drivers door (don't need glass, glass frame or mechanism/handle) - dove blue?
Fresh air vent knob - black

Hmmm list is bigger than I thought.

rolls and pleats · « **Reply #9 on:** July 21, 2010, 09:08:11 PM »

Quote from: Crank on July 21, 2010, 02:00:31 PM

I am looking for:

Correct for 58 Bus

Bosch VJ4 BR8 Distributor

Hmmm list is bigger than I thought.

I have a VJU4 BR8 in nice shape I am in White Rock....

Bruce · « **Reply #10 on:** July 21, 2010, 09:22:55 PM »

Quote from: rolls and pleats on July 21, 2010, 09:08:11 PM

I have a VJU4 BR8 in nice shape I am in White Rock....

That's a Bug distributor. He needs the Bus one

owdlvr · « **Reply #11 on:** July 21, 2010, 09:43:09 PM »

I still can't believe Darren hasn't sent the Mob after me to get his back...

I'm looking to purchase a carb sync tool:

Also want to pickup...
- LF fender, '69.

-Dave

Most of the parts photographed are still available if anyone has requests. The Lang sump, clarkdale frame, seats and shell are all gone though.
http://www.flickr.com/photos/dhdynamics/sets/72157612312706056/

70's Looker · « **Reply #12 on:** July 21, 2010, 09:50:53 PM »

im lookin for some og paint turkis snowflake tail lights damnit! and a 6 volt flasher with 54 k 15 on the three terminals that should be easy oh ya and other crap that i dont need but gotta buy you know what its like

Geoff · « **Reply #13 on:** July 21, 2010, 10:58:19 PM »

Quote from: ont58 on July 21, 2010, 09:50:53 PM

im lookin for some og paint turkis snowflake tail lights damnit! and a 6 volt flasher with 54 k 15 on the three terminals that should be easy oh ya and other crap that i dont need but gotta buy you know what its like

I think I have a NOS flasher and may have some tail lights...call me tomorrow.

Geoff · « **Reply #14 on:** July 21, 2010, 11:00:21 PM »

Quote from: owdlvr on July 21, 2010, 09:43:09 PM

I still can't believe Darren hasn't sent the Mob after me to get his back...

I'm looking to purchase a carb sync tool:

Also want to pickup...
- LF fender, '69.

-Dave

Most of the parts photographed are still available if anyone has requests. The Lang sump, clarkdale frame, seats and shell are all gone though.
http://www.flickr.com/photos/dhdynamics/sets/72157612312706056/

Dont waste your time or money with that type og sync tool.

get this style, makes it so easy!

http://www.thesamba.com/vw/classifieds/detail.php?id=554237

bwaz · « **Reply #15 on:** July 22, 2010, 09:25:11 AM »

Could use NOS (ha ha) or nice hub cabs for early beetle 5 bolt's

vwboop · « **Reply #16 on:** July 22, 2010, 10:38:39 AM »

Hey Dave,
We have one of the old style Motometer sync tools at the clubhouse. You are welcome to borrow it or come out and use it.

Quote from: owdlvr on July 21, 2010, 09:43:09 PM

I still can't believe Darren hasn't sent the Mob after me to get his back...

I'm looking to purchase a carb sync tool:

Also want to pickup...
- LF fender, '69.

-Dave

Most of the parts photographed are still available if anyone has requests. The Lang sump, clarkdale frame, seats and shell are all gone though.
http://www.flickr.com/photos/dhdynamics/sets/72157612312706056/

Batan · « **Reply #17 on:** July 22, 2010, 08:53:23 PM »

I will probably want a stock early bay window muffler. I'm getting tired of puffing myself with smoke while fiddling with the engine.
I might want a stock vacuum advance dizzy in good shape too. Or other bay window bits... part shopping/swap meets are fun!

EDIT: forgot, I need a dome light. Possibly front bumper(if in better shape then mine, mine is a bit rippled in places)

blarneyman · « **Reply #18 on:** July 22, 2010, 10:12:56 PM »

Does anyone out there have a SP dual carb setup complete? Even just the manifolds would be a start.

JimZ · « **Reply #19 on:** July 23, 2010, 07:45:04 AM »

this is jim im bringing alot of photo copies of a vw trike with us to the swapmeet to hand out it could be up for sale this is one bad machine so look for me and get a picture

beetleboy · « **Reply #20 on:** July 23, 2010, 05:01:22 PM »

type1 early 60s front bumper with towel-bar and over riders. Also looking for a white steering wheel and signal switch same year.

JimZ · « **Reply #21 on:** July 24, 2010, 08:16:38 AM »

is anybody looking for diecast vw toys im bringing alot to the swapmeet

JimZ · « **Reply #22 on:** July 24, 2010, 07:03:57 PM »

is anyone looking for beetle glass rear or quarter also beetle fenders engine hoods i have alot my home no 604 886 0662 jim

Bruce · « **Reply #23 on:** July 24, 2010, 11:21:49 PM »

What's wrong with your space bar?

Crank · « **Reply #24 on:** July 25, 2010, 08:49:10 AM »

PENDING
-----------

I have a mid 60's walkthrough section of a bus that I was going to cut up into pieces for repair panels, but if anyone is interested in it, make me an offer before the sawsall gets plugged in.

hotvw1 · « **Reply #25 on:** July 25, 2010, 08:07:54 PM »

I am after a very nice (perfect) bay window westy side window screen. Has to have the white plastic holders and no kinks or creases. I also could use a back window curtain holdback. It is longer than the ones up front. Oh in white.

vwshawn · « **Reply #26 on:** July 25, 2010, 08:32:35 PM »

I need the adjustment levers and the pieces that go inside the seat frames for a 65 Beetle.
Please somebody help me!
Shawn

Stephan Schmidt · « **Reply #27 on:** July 25, 2010, 09:22:18 PM »

Some parts I'll be bringing:

Berg Shifter
Autometer 160 mph 5" speedo
Autometer 5" tach with shift light & recall (10,000 RPM)
Autometer pro-comp warning light
Type 1 mirrors (pre-67)
2 sets of complete Hella Snowflake taillights (55-61)
Amber/red hella taillight lenses
"homemade" fatboy muffler
Gene Berg oil temp sensor
Empi pully
LanD fuel tank clamps
67 decklid
pre-67 hood
Aftermarket double bumpers (pre-67)
Facet electric fuel pump with block off plate & fuel pressure regulator
pre-64 door parts and windows
stock Ball joint beam swaybar
type 1 rear fender (pre-67 italian good quality aftermarket)
lots of pre-67 dash and body/interior misc. pieces
King & Link pin repair kit
Flat4 silver powdercoated roof rack (new) with locks
New Convertable 58-64 red/white TMI seat covers & kick panels
lots of new rubber seals/grommets

etc.. etc..

Plus watercooled stuff too!

JimZ · « **Reply #28 on:** July 28, 2010, 08:07:44 AM »

hi stephen were planning on bringing our ford truck im also looking for a chrome fanbelt guard the mesh net design do you have that jim

Stephan Schmidt · « **Reply #29 on:** July 28, 2010, 03:38:47 PM »

Quote from: JimZ on July 28, 2010, 08:07:44 AM

hi stephen were planning on bringing our ford truck im also looking for a chrome fanbelt guard the mesh net design do you have that jim

Jim,

I do not have one of those guards.

Talk to you at the swap meet!

Stephan

Author Topic: Official 2010 gcvws swap thread (Read 7412 times)

CHEECH

Crank

Crank

Stephan Schmidt

Stephan Schmidt