AirSpeed VW Community Forums
General Forums => Classifieds => Topic started by: Geoff on July 21, 2010, 10:10:06 AM
-
Ok guys and gals, it's that time again. Get your swap spots booked now at the pre reg page at www.gcvws.com we still have some spots but they are goin quick.
Post what you want, need or will be bringing.
Spots are $40 for a 20*20' max two vendors per spot
-
Looking for a decent passenger side running board with the wide trim on it.
-
Bringing some green metal and whatever else I can find around the yard
-
I need an OG paint Delta green rear hatch for an early baywindow, rear hatch seal for baywindow, sliding door seal for bay, drum to drum 64-67 split bus beam
-
I need two sets of 60/40 front seats for late split busses in useable condition, Rear split bus bumper (pointed end - 66/67), 66 and earlier rear bus seat, a truck rear gate, rear wheel well arches for a late split bus, hoops/canvas for a SC or DC....etc...
-
Wanted: early beetle floor mats, "L" luggage brackets, flat top distributor cap, emergency brake boot, 4 bolt wheel cylinders.... used ok as long as they're rebuildable, oval style dash glove box for my Zwitter....
-
Looking for a decent passenger side running board with the wide trim on it.
Haha that's funny, I need a decent drivers side running board with wide trim on it, preferably German for a patina car.
-
Could have picked up a decent pair for CHEAP in Seattle last weekend at the Saturday swap meet :(
-
I am looking for:
Correct for 58 Bus
Front wheel wells - (the section under the seats) both sides.
Bosch VJ4 BR8 Distributor
Coat hooks for a 58 bus (3 of them)
Original door handles for Cargo and rear hatch. (with keys?)
Horn center piece (whole mechanism -button, chrome ring, outer ring)
Drivers door (don't need glass, glass frame or mechanism/handle) - dove blue?
Fresh air vent knob - black
Hmmm list is bigger than I thought. :)
-
I am looking for:
Correct for 58 Bus
Bosch VJ4 BR8 Distributor
Hmmm list is bigger than I thought. :)
I have a VJU4 BR8 in nice shape I am in White Rock....
-
I have a VJU4 BR8 in nice shape I am in White Rock....
That's a Bug distributor. He needs the Bus one
-
I still can't believe Darren hasn't sent the Mob after me to get his back...
I'm looking to purchase a carb sync tool:
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fwww.chircoestore.com%2Fcatalog%2Fimages%2F012154.jpg&hash=2c04c002d2c4d4a9644eed6b69cbe8caf9e61ed7)
Also want to pickup...
- LF fender, '69.
-Dave
Most of the parts photographed are still available if anyone has requests. The Lang sump, clarkdale frame, seats and shell are all gone though.
http://www.flickr.com/photos/dhdynamics/sets/72157612312706056/ (http://www.flickr.com/photos/dhdynamics/sets/72157612312706056/)
-
im lookin for some og paint turkis snowflake tail lights damnit! and a 6 volt flasher with 54 k 15 on the three terminals that should be easy oh ya and other crap that i dont need but gotta buy you know what its like
-
im lookin for some og paint turkis snowflake tail lights damnit! and a 6 volt flasher with 54 k 15 on the three terminals that should be easy oh ya and other crap that i dont need but gotta buy you know what its like
I think I have a NOS flasher and may have some tail lights...call me tomorrow.
-
I still can't believe Darren hasn't sent the Mob after me to get his back...
I'm looking to purchase a carb sync tool:
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fwww.chircoestore.com%2Fcatalog%2Fimages%2F012154.jpg&hash=2c04c002d2c4d4a9644eed6b69cbe8caf9e61ed7)
Also want to pickup...
- LF fender, '69.
-Dave
Most of the parts photographed are still available if anyone has requests. The Lang sump, clarkdale frame, seats and shell are all gone though.
http://www.flickr.com/photos/dhdynamics/sets/72157612312706056/ (http://www.flickr.com/photos/dhdynamics/sets/72157612312706056/)
Dont waste your time or money with that type og sync tool.
get this style, makes it so easy!
http://www.thesamba.com/vw/classifieds/detail.php?id=554237
-
Could use NOS (ha ha) or nice hub cabs for early beetle 5 bolt's
-
Hey Dave,
We have one of the old style Motometer sync tools at the clubhouse. You are welcome to borrow it or come out and use it.
I still can't believe Darren hasn't sent the Mob after me to get his back...
I'm looking to purchase a carb sync tool:
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fwww.chircoestore.com%2Fcatalog%2Fimages%2F012154.jpg&hash=2c04c002d2c4d4a9644eed6b69cbe8caf9e61ed7)
Also want to pickup...
- LF fender, '69.
-Dave
Most of the parts photographed are still available if anyone has requests. The Lang sump, clarkdale frame, seats and shell are all gone though.
http://www.flickr.com/photos/dhdynamics/sets/72157612312706056/ (http://www.flickr.com/photos/dhdynamics/sets/72157612312706056/)
-
I will probably want a stock early bay window muffler. I'm getting tired of puffing myself with smoke while fiddling with the engine.
I might want a stock vacuum advance dizzy in good shape too. Or other bay window bits... part shopping/swap meets are fun!
EDIT: forgot, I need a dome light. Possibly front bumper(if in better shape then mine, mine is a bit rippled in places)
-
Does anyone out there have a SP dual carb setup complete? Even just the manifolds would be a start. ;)
-
this is jim im bringing alot of photo copies of a vw trike with us to the swapmeet to hand out it could be up for sale this is one bad machine so look for me and get a picture
-
type1 early 60s front bumper with towel-bar and over riders. Also looking for a white steering wheel and signal switch same year.
-
is anybody looking for diecast vw toys im bringing alot to the swapmeet
-
is anyone looking for beetle glass rear or quarter also beetle fenders engine hoods i have alot my home no 604 886 0662 jim
-
What's wrong with your space bar?
-
PENDING
-----------
I have a mid 60's walkthrough section of a bus that I was going to cut up into pieces for repair panels, but if anyone is interested in it, make me an offer before the sawsall gets plugged in.
:evil1:
-
I am after a very nice (perfect) bay window westy side window screen. Has to have the white plastic holders and no kinks or creases. I also could use a back window curtain holdback. It is longer than the ones up front. Oh in white.
-
I need the adjustment levers and the pieces that go inside the seat frames for a 65 Beetle.
Please somebody help me!
Shawn
-
Some parts I'll be bringing:
Berg Shifter
Autometer 160 mph 5" speedo
Autometer 5" tach with shift light & recall (10,000 RPM)
Autometer pro-comp warning light
Type 1 mirrors (pre-67)
2 sets of complete Hella Snowflake taillights (55-61)
Amber/red hella taillight lenses
"homemade" fatboy muffler
Gene Berg oil temp sensor
Empi pully
LanD fuel tank clamps
67 decklid
pre-67 hood
Aftermarket double bumpers (pre-67)
Facet electric fuel pump with block off plate & fuel pressure regulator
pre-64 door parts and windows
stock Ball joint beam swaybar
type 1 rear fender (pre-67 italian good quality aftermarket)
lots of pre-67 dash and body/interior misc. pieces
King & Link pin repair kit
Flat4 silver powdercoated roof rack (new) with locks
New Convertable 58-64 red/white TMI seat covers & kick panels
lots of new rubber seals/grommets
etc.. etc..
Plus watercooled stuff too!
-
hi stephen were planning on bringing our ford truck im also looking for a chrome fanbelt guard the mesh net design do you have that jim :P
-
hi stephen were planning on bringing our ford truck im also looking for a chrome fanbelt guard the mesh net design do you have that jim :P
Jim,
I do not have one of those guards.
Talk to you at the swap meet!
Stephan
-
thankyou for letting me know stephen see you there jim
-
thanks stephen see you there jim
-
hi stephen were planning on bringing our ford truck im also looking for a chrome fanbelt guard the mesh net design do you have that jim :P
What's wrong with your space bar?
-
hi stephen were planning on bringing our ford truck im also looking for a chrome fanbelt guard the mesh net design do you have that jim :P
What's wrong with your space bar?
You mean tab lock? lol_hitting
-
is there anyone with any intrest in a gas powered gokart the make of it is manco it has a gas and brake pedals tube frame could seat 2 brandnew it cost 1800 00 im selling it for 750 00 i can bring it to the the swapmeet jim
-
Looking for a gas pedal and curtain rails for my 64 11 window bus. Steve, you have any?
-
Looking for K and M key blanks.
-Dave
-
i'm in need of a pair of type 2 intake's for 40mm Dells, anyone?
-
I need the top plastic ducting for the aircleaner.
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fimages.thesamba.com%2Fvw%2Fgallery%2Fpix%2F299873.jpg&hash=50ba19eb1ca10b1c8f7800b0a223c6c11224af9e)
-
i have 3 vw beetles up for sale i have a 57 oval a 71 a 72 the oval has a brandnew floor the rest of it needs resto the 71 has a new floor rebuilt 1600 cc it just needs brakes i have the fenders to go with it the 72 is all original in and out it just needs the engine i have it and brakes here are the prices the oval 3500 00 71 is 2000 00 72 is 1500 00 reply or phone 604 886 0662 im in gibsons plus i have hundreds of beetle parts here thankyou jim
-
from your picture about the top ducting i think i have it in my hand my no is 604 886 0662 are you coming to the swapmeet jim
-
this is the top ducting peice i have that your looking for do you still want it or not :-[ :-* :-*
-
Splitty bits & odds and a few sods....
original 67 split table and leg $50.00
deep sump no fixtures or fittings $50.00
2 Rear Ratty Bumper guards $25.00 for both
1 front headlight ring small dent but useable with tab and screws $15.00
heater blower motor I have never used it $25.00
bus 14mm wheel hardware kit from cip1 $40.00
fawcett from 67 bus $20.00
Msd Blaster 2 coil $45.00
bus coil $25.00
Empi quick shift kit $5.00
67 bus gasdoor with lock, beige great shape $25.00
1 beige grab handle plastic original $10.00
-
I'm looking for a set of show quality hubcaps for wide five wheels, (50's car)
-
I have a VJU4 BR8 in nice shape I am in White Rock....
That's a Bug distributor. He needs the Bus one
Thank's Bruce, it works great.
Just what this little singleport needed ;D
-
Im taking
left and right barn doors (drivers and passengers) with glass and some handles
bay window doors complete
two bay window motors runners, 1600 single ports with moustacheeeee bar still attached
16 inch powdercoated mercedes rims with rubber from dannyboys old bus
14 porsche fuches with adapters for bay window
lots of taillights, funny plastic pieces
two bay window hammicks
some 68 to 72 seat cores
some picts a 04-73 westy we will be parting that is complete
picts of 1700 cb block runner that will not be at the show.
lots o buckets of stuff
56 passenger type 1 door in good shape
67 drivers door type 1 in good shape
60's bus glass assembly's
rubber matts front for 60 buses
middle 2/3 como seat 64 ish bus
couple of gas heater units
big box of old eletrical
some ecu's ect
some old kads
carbs
Lots of little 60's bus pieces
Big M radio
steering wheels
60's beetle stuff
ect ect ect
-
Steveo, left u a message on Porsche adapters and Benz wheels. Add it to my pile!
-
Wanted for my 70 type1:
-Front seat (dr side prefered but mainly needed for springs & plastic bits).
-Dr side Y connector for defrost tube.
-The rod that connects thermo flaps for doghouse style.
-Pass side dash grab handle.
Thanks,
Randy
-
i have atleast 20 of 50 s hubcaps are you c oming to swapmeet :P :P :P
-
Pick me the five best ones Jim.... I'll be there
Brian
-
i will look at them i will do my best and pick out some we are in a white and blue ext cab ford truck so tell me who you are i will keep your caps for you jim ps were bringing alot of goodies ;D
-
looking for a pair of late bay window disc spindles, Steveo has some that I will get but I need one pair for the sunday show if possible
-
who has got a chrome fanbelt guard the meshnet design i need one bad im in the the swapmeet hopefully someone will respond by sat night so we could exchange info :'( :'( :'( :'( :'(
-
Mid to late 80's Vanagon GL front seats (with armrests) and preferably the non-camper version. Thanks.
-
Anyone have a radio block off for a '69 Beetle?? I'll be at Sunday's show if you want to slip it in my back pocket. lol_hitting If you don't know who I am, and have one, please PM me. Thanks, Darren.
-
derrin your a dumbass! lol_hitting
-
Anyone have a radio block off for a '69 Beetle??
There's no such thing as a radio blockoff for a 68 and later Beetle. Once you cut the hole, you're stuck with it for life.
-
Anyone have a radio block off for a '69 Beetle??
There's no such thing as a radio blockoff for a 68 and later Beetle. Once you cut the hole, you're stuck with it for life.
You guys make me laugh......"Dumbass"priceless ......
-
All the "talent" on this site, and no one can come up with a '69 radio block off??? It's just a rectangular flat piece of metal! Come on.... :P Oh, and Stefan....who's "derrin"...Dumbass! :-*
Anyone have a radio block off for a '69 Beetle??
There's no such thing as a radio blockoff for a 68 and later Beetle. Once you cut the hole, you're stuck with it for life.
-
hey dumbass a 68 beetle has a padded dash like bruce said, and if its the metal one you need i have lots just post properly to avoid confusion! ans you still a dumbass! lol_hitting