AirSpeed VW Community Forums
Technical => Chassis & Suspension Forum => Topic started by: WhiteDonkey on September 17, 2015, 08:44:42 PM
-
Hi all and thx in advance
I have a king n link front beam and the inner race for the bearing is stuck on the spindle .....I've soaked and heated.......still does not remove .....any tricks or ideas pls
-
Drill it then split it with a chisel
-
You should be able to clamp a bearing splitter into the groove between the bearing and the spindle. Then use a standard puller on the bearing splitter.
If that doesn't work, take an angle grinder and grind it at 12 O'Clock until it is super thin. Then hit it with a hammer and it should split.
-
If he was running late and didn't get to it until 12:30, would it still work?