The beam should lower the car aprox 4\" sometimes a little more/little less.
I already need a set of narrowed tie rods. (I have 2 stock sets but they are bent and beat.)
-Shocks (short or stock length?).......short, stock if you use droped spindles
-Shock mounting kit
-2 inch narrowed Ball-joint sway bar........yes and mounting kit
-Ball joints (stock or lowered type)either will work but the lowered ones are better for your aplication
-Trailing arm seals (stock or urethane?)..........stock
-Camber adjusters.............caster shims
-Bump steer kit......not really needed
-Steering damper ....yes