AirSpeed VW Community Forums
Project Forums => ASF Member Projects => Topic started by: Kevin K on June 23, 2011, 10:29:47 PM
-
having finished my engine, i needed something to put it in, it just so happened that a friend of my dads saved a bug from the crusher a few years ago and we bought it off of him. After sitting for 6 or 8 years it was pulled out last Sunday. Although it is very rough and will take me a few years to complete, it was a very good 15th birthday present :)
the body is very rough and will need new heater channels, bumper brackets and a lot more sheet metal. the pan will also need work, i plan on buying 2 1/2 pan peaces, one for each side, to put on the rear sections.
when sitting this beetle was not doing nothing, it was housing a family of rats, that was fun to clean up...
any way lots of work ahead but here are some pics to start.
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2Fmy%2520beetle%2Fmybeetleandfinishedengine051.jpg&hash=58801d66ebe0c4832d3c6043444bdd9a6225aade)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2Fmy%2520beetle%2Fmybeetleandfinishedengine006.jpg&hash=2621d3bbafc6d3652eb90b07cba8a4bf98f2f383)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2Fmy%2520beetle%2Fmybeetleandfinishedengine046.jpg&hash=b6b5948cd2b9dadfdfd6b744ae266f284d988b38)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2Fmy%2520beetle%2Fmybeetleandfinishedengine045.jpg&hash=fa5a9fa575dcddff4b3106a82d6ea710a45db24f)
-
well done!! 58-61 are totally the best years after all! keep at er, a little thing here a little thing there and itll be done in no time just stay at it!
good luck!
-
well done!! 58-61 are totally the best years after all!
iagree
-
thanks guys,
I've got all summer to do some work on this thing , hopefully i get a lot of stuff done
-
So Kev did the Rats move into the blue fridge? :D I've told your Dad I'm off work soon and can come over and pull the fridge from it's resting place get it to the crusher and you'll have more room to work!
Gary
-
no worries Gary
already done, it was funny, we hooked up the come along to the hitch for the westy parked pretty much at a 90 degree angle to the "fridge" and started winching, but the fridge wasn't moving... and then, we herd a thunk. we looked behind and the westy had shifted toward us, and the blue westy hadnt moved. eventually we got it out and found an active bee hive in the back, the bees didn't like the move.
-
hello again
me and my dad just got the body off the pan.
now that they are separated i am going to tackle the pan and chassis first.
but first i have to get the beam and tranny off to fully assess the damage
their is no turning back now
here are some pictures
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2Fbody%2520off%2520pan%2Fbodyoffpan003.jpg&hash=71f028f312d5b02af548686c7f96adcc885338ed)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2Fbody%2520off%2520pan%2Fbodyoffpan001.jpg&hash=0e632fa83633259808c1e90db752e0e9b546d8d5)
-
i have got my pan up on the stand now and me and my dad have decided to try to save the pan halfs.
i suppose i'm starting from the back then moving forward. so here is what it looks like at the moment.
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2Fstarting%2520my%2520pan%2Ffirstpaintonthepan002.jpg&hash=890536a1005af1e1e596c7f184e0a1c0a01bd6eb)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2Fstarting%2520my%2520pan%2Ffirstpaintonthepan006.jpg&hash=201494332d93ce87af0d0e3573d44c07b334a1e6)
-
Great start. Your going to know this beetle inside out. Good for when something goes wrong. Pretty cool first car. PDT_Armataz_01_37
-
thanks brodie
hopefully i don't forget how to do all of this stuff
and ever since i was 5 years old i have wanted a 58 to 61 beetle so im glade i have a "60"
-
i have got my pan up on the stand now and me and my dad have decided to try to save the pan halfs.
i suppose i'm starting from the back then moving forward. so here is what it looks like at the moment.
http://s1231.photobucket.com/albums/ee520/volks5/paint%20on%20pan/?albumview=slideshow (http://s1231.photobucket.com/albums/ee520/volks5/paint%20on%20pan/?albumview=slideshow)
That's the cleanest I've ever seen your back yard! PDT_Armataz_01_37 Mom must be happy! I thought you were coming over for the welding machine before you lifted the body?
GAry
-
and ever since i was 5 years old i have wanted a 58 to 61 beetle so im glade i have a "60"
A little partial to those years as well. iagree
-
i did a lot of work of work on my pan today, I finished fitting and tacking in the battery patch that came with the car and also fitted and tacked in another replacement panel
hear are some pictures
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2Ffirst%2520pan%2520patches%2Fvwbuganftype3pics015.jpg&hash=cf444c9dc69882a58fbd7e5697a7f2be0b4d8293)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2Ffirst%2520pan%2520patches%2Fvwbuganftype3pics017.jpg&hash=0923e5c0dcfb51dd697bc7a4311dfa8f736f03ff)
tomorrow i want to finish welding them in and clean the welds as well and get started on the next patch
a cool thing happened today, was me and my dad were on the way out of the neighbourhood when we saw about 11 Shelby cobra kit cars in a drive way so we went to check out the cars
here are some pictures
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2Fshelby%2520replicas%2Fvwbuganftype3pics005.jpg&hash=5a45f8a9ef9ccb8c2be00481948f720ad1ab0fb1)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2Fshelby%2520replicas%2Fvwbuganftype3pics013.jpg&hash=81a54e2dfeff4e9bab76e85e33f2c44f4b0f2752)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2Fshelby%2520replicas%2Fvwbuganftype3pics006.jpg&hash=29a24b937e303b0d9f5050c3e5933cfc9b905569)
-
finished up my pan today
it isn't perfect but it will do
here are some pictures
-
nice to see some progress on the car!! You_Rock_Emoticon, now it would be nice to see some progress on your dads single cab! : :o :P
-
:stupid:
-
iagree Looks good Kevin ! PDT_Armataz_01_37 Maybe when your done you can trade one 60 bug for a new project single cab. Now is your your Dad going to get his parking back for the Fasty?
Gary
-
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2Fpaint%2520on%2520pan%2Ffinishingpanrepare023.jpg&hash=67e256528dbc4f1654abea3b3585e7ed65ff2c1f)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2Fpaint%2520on%2520pan%2Ffinishingpanrepare012.jpg&hash=45e96fa2b38cf6a943e375227d0b8cce514cee0a)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2Fpaint%2520on%2520pan%2Ffinishingpanrepare006.jpg&hash=ce807275582cbda2d859e29a9ff4d3e636dac8d3)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2Fpaint%2520on%2520pan%2Ffinishingpanrepare014.jpg&hash=f150e5a7d291be838e36cdbcab1cae349b6c29d6)
-
got most the front end together now
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2Ffront%2520end%2Ffrontendvwbug003.jpg&hash=1fdf50f5f870ff2f94d622b36a476166c1d5468b)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2Ffront%2520end%2Ffrontendvwbug005.jpg&hash=752a7438e7256a1b28a10606392148da3eb70996)
-
I've been working on my pan quite a bit
im close to driving the pan around!!!
here are some pictures
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2Fpan%2520sitting%2520by%2520its%2520self%2Ftiresonpan001.jpg&hash=067282fbdda864510a3778be6b210124cb688cce)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2Fpan%2520sitting%2520by%2520its%2520self%2Ftiresonpan002.jpg&hash=84ff27e08a06ba7cedea8a9d1d5a30b126a7e654)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2Fpan%2520sitting%2520by%2520its%2520self%2Ftiresonpan003.jpg&hash=b06dd67064ab26cfb9d9bde72160ca7cb9167ef5)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2Fpan%2520sitting%2520by%2520its%2520self%2Ftiresonpan012.jpg&hash=61376521dee26525c9618dfd09dff0674ae405f0)
-
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2Fpan%2520sitting%2520by%2520its%2520self%2Ftiresonpan001.jpg&hash=067282fbdda864510a3778be6b210124cb688cce)
looks great kevin!!! keep up the good work!! :cool:
-
i got my pan going under its own power last weekend!
it was cool
here it is
http://www.youtube.com/watch?v=6Ai08GBOVO4 (http://www.youtube.com/watch?v=6Ai08GBOVO4)
-
Kevin, well done Kiddo, you must be proud.. Does not hurt having a teacher like Dad...Keep the posts coming...
So tell me.. what are your dream wheels for this car? This car is a keeper for life bud. dont do what Dad did...LOL
-
thanks Shane
i am proud of what i did last summer, and it was realy fun to be able to drive it around
i hope to be able to start on the body this summer
kevin
-
hello again
lots of progress has been made on the '60, i have so far replaced one heater channle and almost every thing that would be welded to it...
here are some pictures
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1169.photobucket.com%2Falbums%2Fr510%2F1960volks%2Fstart%2520the%2520body%2Fc329ed69.jpg&hash=d0d1b14bb026649050f608850d24df3764fed809)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1169.photobucket.com%2Falbums%2Fr510%2F1960volks%2Fstart%2520the%2520body%2F01e994e1.jpg&hash=09de9fbfe93a459c20600a942c142a43fdb66e0b)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1169.photobucket.com%2Falbums%2Fr510%2F1960volks%2Fstart%2520the%2520body%2Fb44d6e33.jpg&hash=3a3907389d3866d8fe305df86602c81931f00646)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1169.photobucket.com%2Falbums%2Fr510%2F1960volks%2Fstart%2520the%2520body%2Ffb1b3344.jpg&hash=0fc4552a480d1f59bd9e253148008462350d4144)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1169.photobucket.com%2Falbums%2Fr510%2F1960volks%2Fstart%2520the%2520body%2Fa7770c40.jpg&hash=84838fccdbeb71a0cb6d6c99fffc4f48aedf0b03)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1169.photobucket.com%2Falbums%2Fr510%2F1960volks%2Fstart%2520the%2520body%2Fea3c750c.jpg&hash=c3ac4fe474fdd1706e4311aa680b76d20e127605)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1169.photobucket.com%2Falbums%2Fr510%2F1960volks%2Fstart%2520the%2520body%2F07cc8cc3.jpg&hash=edda96e115caa93fba647c2010fb7d092f27193a)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1169.photobucket.com%2Falbums%2Fr510%2F1960volks%2Fstart%2520the%2520body%2F9c010dc4.jpg&hash=009d5313be1f1b2a37fcbc410c4842f31794d0ef)
-
Been working on the bug lately, I still have a few patch panels to fit but it is getting their
I ended up making my own rear H apron for it with an old H apron and a new '66 apron
here are some pictures
-
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2FVancouverpictures2013001_zpsfec8ea23.jpg&hash=b538966c0c5f93dda6ee97991523523dc069781f)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2FVancouverpictures2013014_zps04552284.jpg&hash=00bd6d3fefa5fc7b1da40489f859066ce36b51f3)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2FVancouverpictures2013018_zps5308b1a8.jpg&hash=31b1029304597e24665fc59449cd81a86fd984f4)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2FHapron002_zps2236f8a8.jpg&hash=548aca9fe3e91b31db06e5b517d288e12fb2f9b2)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2FHapron003_zps488a9f01.jpg&hash=d7e84961f78c09c11f7a1edcddfec0549a0363ef)
-
Nice work! That rear apron slice looks like a pain in the butt. Just wondering why you didn't just do full pan half replacements?
-
If I could do it again I would do the full pan half’s
when me and my dad first looked at it, it looked completely savable but I kind of opened a can of worms with a lot of unexpected rust in front of the passenger seat railing but I finished it and its solid now so I will serve its purpose even though it isn't the prettiest pan around
-
so I ended up welding up the rest of the apron and it is really looking like an H apron now, after it was welded I took it to school and did a little sandblasting and gave it a quick once over with some rust remover
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2FbusandKevinswelding085_zpsb6f603e9.jpg&hash=6d1dd040cf5d4ec2c57fec432cc0e696995e23bd)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2FbusandKevinswelding086_zps756e365a.jpg&hash=e2a89decd9225ccc73736cee97ad0a59c6d2db96)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2FbusandKevinswelding084_zps20ee4dcf.jpg&hash=b6844ff2cfb44f8a3ba1e42c815f72dbbe8282ca)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2Fvwbeetlesept2013040_zps6266b2e1.jpg&hash=255fc0f5570ed3fe33065e7ab0bbfccab3f67203)
I also have been working on the front apron, specifically the spare tire holder. Me and my dad decided that the original metal was to beat up to save so out came the angle grinder and torches and I replaced that section as well
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2FbusandKevinswelding088_zpscd324dc0.jpg&hash=1c69f5627198676012d32b86410d608524015abb)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2FbusandKevinswelding090_zpsa6096358.jpg&hash=60b2709895679edabb8b96dc40f9fab0ab47a2ca)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2FbusandKevinswelding110_zpsd1efeb4b.jpg&hash=4542abbcde0245d16a8a8d80e1d26514e2364c6f)
-
For my first semester as I am still in high school I had signed up for a mechanics co-op which is all auto shop all day. I was able to get my car in the shop and I have been working on it every day, what an awesome program. I have been able to do allot of work on it. I have been able to get all of the metal work done on the car except for a little bit on the rear apron and welding up the quarter panels. I also started striping the paint off and prepping the metal for paint. I also found out that my doors have allot of rust so I ended up buying new ones
here are some pics.
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F20131210_113219_zps62921e15.jpg&hash=d6b2151674a213a385b2604fa7a3b4ef0cd6dcc5)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F20131210_113124_zps835ea427.jpg&hash=49a5362fcbdff23d54a6136dfee147e5eef8d304)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F20131210_112805_zps89d6da1e.jpg&hash=3b92af8f5d4073cf163eb02de269f53f7098bc9f)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F20131204_135713_zps291e14a3.jpg&hash=b6aa154baae2188bc4f4459aebd2b31db7103e1a)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F20131204_135554_zpscefdd943.jpg&hash=c3198a9b6a2772f31f36a7da8a16a2104822d216)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F20131204_135520_zps29f87a24.jpg&hash=84b2754e694bbbd466b51e9f75889878e6573cfe)
-
Since the last post I have gotten my car back home where the work continues
Last weekend me and my dad went to what is now called icing on the car but was Canadian auto restoration to do some sand blasting on the car
Luckily their weren't to many surprises just a few spots in the doors but no big deal
Here are some pictures
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F20140104_123022_resized_zpsd350ce9b.jpg&hash=79de05392bc33325d999dd5d1107e9cdeff1518f)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugaftersandblasting001_zps27343444.jpg&hash=02cdef31b55fc8d76fb2212a206f534e2df9cd31)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugaftersandblasting005_zps57334134.jpg&hash=0035b4f0283d6392333e40a69810f000f852954e)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugaftersandblasting007_zpsc582814e.jpg&hash=6d0e10ebac6051a13c6d70d2b653e6cea8caceda)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugaftersandblasting013_zps06579385.jpg&hash=5f84379aa90b5f4d61e1567f69496b332c9bfe6c)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugaftersandblasting022_zps1c3913fc.jpg&hash=da7729a7dae5f891f303a67a55b496a17409eb39)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugaftersandblasting024_zpsd5b8ed61.jpg&hash=f6375e2c5a143e139f167bb1812665c2191eb7cf)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugaftersandblasting043_zpsa437fa3a.jpg&hash=b6eef118fd357d1c88cd20948bac383ca12295d4)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugaftersandblasting036_zpsf2cf1df8.jpg&hash=e32545910b77e3cf47a0b98b2cb8c950d8a43530)
-
I have an oval window section if your rust issue there is extensive. Let me know if you need a chunk
-
no thats ok
I dont think its too bad
the picture makes it look a lot worse so I should be ok
thanks though
-
"Last weekend me and my dad"
that is ..." my Dad and I " ;)
-
"Last weekend me and my dad"
that is ..." my Dad and I " ;)
Nice one Hans. I'm a stickler for shit like that. Too much auto class not enough English class. HAHAHA. ;)
Great progress Kevin. Did '60's come with ice pick door handles?
-
Actually both are correct, if I recall correctly it is dependent on whether or not the persons referred to are subjects or objects of the statement.
Looking good Kevin, it is awesome that you get to use the shop class for time to work on your car!
-
Actually I am no expert in grammar and spelling so I would have to take your word for it Chris. I just like to try and correct Him when ever I think I can. :police:
-
nice work kevin! looks pretty solid, glad to hear there weren't too many surprises after blasting!
-
Right on bud! Damn nice work for a young buck!! Grade 11 was when my automotive interests really took off....I built a hot rod GTI in shop class grade 11-12....There were a couple of us that actually worked on our cars, most other kids were too busy installing hot stereos and filling back pockets of coveralls with grease guns when kids weren't paying attention sign0151
Keep at it dude!
-
Thanks josh
Ya the auto shop helped me get a lot of work done on the car which is nice
Weirdly enough there are only 2 others in my class who own their own cars, but I think I’m the only one fixing it to this extent. They all say I’m crazy but whatever it’s all fun
-
Chris, I was waiting for you to reply. ;) "weardly" should be "weirdly". Too, one of the few exceptions where "I before E, except after C" doesn't work.
-
OMG!! KEVIN !!! GET IN HERE AND CLEAN THIS UP !! sorry guys ... the school system has failed us .
-
I get called on this shit every day from my wife.... better get used to it now ;)
-
My bad
As you can read English isn’t my strong suit
I much prefer wood or metal work
-
Quick update on the car, I was able to weld up the new bumper bracket sections last weekend, and it came out better than I had expected. There is so much space to work around the area I was able to really hammer weld and flatten my welds out while it was still hot instead of reaching around doorposts and what not
Here are some pictures
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugbumberbracketsweld243_zps071b128e.jpg&hash=48d39d7fb5d05277efe84f873ec51f1b2cab7c7b)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugbumberbracketsweld242_zps9147015d.jpg&hash=a682379584f7b09c40b72630e51a80a38881b756)
This picture was taken before I did any grinding
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugbumberbracketsweld240_zps026d0c01.jpg&hash=6cd9234efed64bb05eb12eb64536ba0a99c043b3)
-
Nice work, looks like you're making good progress! Keep it up.
-
Been doing lots of work on the '60, specifically on the rear apron
my dad has had an old spot welder for years but we never used it because it had no plug, so my Opa helped me wire it up and to my surprise it worked, it worked very well in my case because the welding ends are not in a fixed I will add a picture or two instead of explaining it. So the rear apron is fully welded on after playing with the location of the deck lid and apron to get it latching properly. And now the engine seal shelves are getting welded in after getting my engine in it
Each step is a step toward paint, getting close now
heres the spot welder
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F1960bugapronfinished528_zps4b72b06d.jpg&hash=01956d5f32cf5a70508d5156d90ce887ab4dd6b9)
here are the ends, it can get a little tricky lining up the ends but handy for getting lots of weird places
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F1960bugapronfinished527_zps27ab76b1.jpg&hash=dc877f932cab7e6ab66b0459f5951948b326174b)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F1960bugapronfinished508_zps099787ba.jpg&hash=f4572866accc6150d48ec741403cffd1b9fd4165)
I'm really happy with the way the whole rear end ended up
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F1960bugapronfinished513_zpsd7d7baec.jpg&hash=b0bd0dfdfe49a6ca1957cddc073af154292ad87e)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F1960bugapronfinished517_zpsde6b03a0.jpg&hash=43e54882bab2acd210e373b00926f302afc3981b)
the spot welder actually went through my weld through primer
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F1960bugapronfinished485_zps30b06bc0.jpg&hash=673dc1e7ed062268dc0c53e541ffe81463a1c1c1)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2Fmoreworkonrearend007_zpsf16038e8.jpg&hash=df21f271a7a02e256f6a8ccf6b5106dac20105d6)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2Fmoreworkonrearend006_zpsf7ecbb4a.jpg&hash=c665ca31d71b705da955cbfb3bd09ec58eee9d3c)
-
Nice work man !
-
Ok, so lots more work done on the bug
I had to make some C channel for the engine seal tin on the apron, I ended up doing that at school and it turned out very well, almost looks factory
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2Fvwbugcomingtogether020_zpsbbf31384.jpg&hash=35ac81e2effb538419acaf2af5c0da70214f3cc4)
I finished spot welding to new engine seal trays
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2Fvwbugcomingtogether010_zps7c24aa27.jpg&hash=63567a6515210e531f1b9a75e6a3959d1df3b11c)
After I got my engine in I threw my new fenders on and get the tail lights on, it’s really starting to look like something
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugwithdoors012_zps86bcdce0.jpg&hash=36827f457204ce9d2b5ae0cb91607289f9cb52ef)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugwithdoors006_zps4958bf5e.jpg&hash=4ad2f38f1bcfbedfbd1a671cbdda704dca0873c4)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugwithdoors010_zpsae58203e.jpg&hash=c3253b77976479601d0de7b2f584f44aea18a28a)
After I got it all on I noticed that my apron had more of a curve then my fenders did, it was unacceptable so out came the tin snips and torches
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugwithdoors016_zps04d41533.jpg&hash=1a0ecec48348c440349d357358f99925c72fd11f)
Turned out pretty nice
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugwithdoors024_zpse4b5ca88.jpg&hash=827275e8e0a2660b0c04e653e3f551d2afc65cfe)
It definitely fits much nicer
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugwithdoors030_zps4ada2413.jpg&hash=23b9afe333631d983b325d102817420c086b6279)
Then after looking at the back of my car for so long I noticed the tail lights looked funny, turns out that the driver side was 1/2 inch higher than the passenger so I welded the old holes and made new ones to imitate the other side
Now it is better
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugwithdoors067_zpsc6779194.jpg&hash=9ab50f819538b1d84825a1aaf010ac2b458dda1d)
After that my dad and I reamed my door hinges for the pins
These pieces are 1 thousandth over the pin size
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugwithdoors052_zpsf4d617c3.jpg&hash=daf5b507d8b9418c57c5a9ee26fcdb981b42caa0)
And the door is 1 thousandth under
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugwithdoors051_zps3e674377.jpg&hash=9a02bd99a8fd2fc27e79b09ad799a97fad916875)
Got the doors on today and it looks really good
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugwithdoors064_zpsde17cc11.jpg&hash=646f8a0a2684dd8be1aeb5561014df85df17a4e3)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugwithdoors063_zpsc96f7ce4.jpg&hash=2387e202a1ddc11ec5544e3132941a5d23504310)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugwithdoors080_zpscb9f1415.jpg&hash=63bfd88048cd9f2b686ea778880b2e2fbb3de7a4)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugwithdoors073_zps9dc68691.jpg&hash=abea0da778339e783588c5994b7db15d846fc2ba)
-
Way to go Kevin! Looking good!
-
Ya man killer work! All this panel fitting makes or breaks a car....youre gonna doing a wicked job bro!
-
thanks Josh
I can really appreciate all the work you did to your '55 having had a little taste of panel gaping myself
you make it look so easy!
-
thanks Josh
I can really appreciate all the work you did to your '55 having had a little taste of panel gaping myself
you make it look so easy!
Right on thanks man, its not overly tough but is time consuming! Dont get too cranked on your door gaps quite yet....they will move around lots when you start loading the glass and other guts into the doors! I was really suprized how much movement you get when tightening the body to pan....you can fine tune your gaps by playing with the thickness of pads on body to pan mounts and the sequence you tighten them and the heater channel bolts down.
-
nice resurrection of the old spot welder, it makes the new panel installation look so clean just like it was done at the factory!!
digging the mock up too. awesome work kevin, keep at 'er!!
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugwithdoors073_zps9dc68691.jpg&hash=abea0da778339e783588c5994b7db15d846fc2ba)
-
Thanks Silas
I'm itching to get this thing in paint
down to a 1 page to do list now
-
My dad and I hammer welded the 1/4 panels and got them nice and straight, I also finished the mock up of the car last weekend
just a few last things here and their and its ready the get some colour
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugmockupdone030_zps8b14eb60.jpg&hash=10cc1bdca271dc60114d63a697427cbecb15a471)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugmockupdone029_zpsd96df70f.jpg&hash=785d56117810964ae44adaa0cc982b6a683353b9)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugmockupdone021_zps14d9332e.jpg&hash=f8035b00d505d60970364e7eaca4c58bfcaba801)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugmockupdone022_zpsc8c86243.jpg&hash=00a583670a0b9e55b4f215ecc971e73c586ce0b2)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugmockupdone020_zpsf4b21ce9.jpg&hash=a59d654ce715bc8bd5dfde18fdc06d46c096ec53)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2F60bugmockupdone019_zps43565f6d.jpg&hash=7b3a744f2c9b74d75c93d3e02b2cb85eb502230f)
-
Great to follow your progress Kevin.
-
Emillio!!!! great to see you on the site!
-
this weekend was a thrash to get some paint on the underside of the car, thanks dad for spending your whole weekend in the garage with me, couldn't of done it with out you
ready to go to the paint shop now to get the rest done
epoxy primer
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2Fpaintonthecar003_zps4af29152.jpg&hash=9d1ef9daeb5b4cfdedc77125d6583aca1f33bb43)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2Fpaintonthecar001_zps4d45fc8a.jpg&hash=d784479c7416aef598e954875560f9fbc0de2deb)
their it is in base coat, sitting on the jig my dad made to get the under sides
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2Fpaintonthecar012_zpsd0158b23.jpg&hash=04b8da31f1417c8d07373e23b3700d3b42ecef65)
clear
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2Fpaintonthecar011_zps6dc9a344.jpg&hash=ca15819464cd4adf13548dcfe7683cac76e2aa65)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2Fpaintonthecar010_zps3ec7c455.jpg&hash=5d9193e968902b7032d96872326db0d420935829)
-
the car has been in the paint shop for a while now and i was able to go see the progress yesterday. My painter, Ross says that the fenders, hood and deck lid should be in finished paint this week and the rest of the car in high build primer soon after
here are some pictures of where its at now
theirs the rear apron all finished with the c channel welded in
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2FIMG_1461_zps32f11338.jpg&hash=0c7b9dfcc9d059da272b941f3b0b4db41a1a927f)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2FIMG_1463-Copy_zps1fbb40b0.jpg&hash=82c215c7f6f5ea3d26ed5f0e9ceff6ff70f49f7d)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2FIMG_1462-Copy_zps3a7550f5.jpg&hash=53a91402356ddd242459209d8c8ddc4828512562)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2FIMG_1466-Copy_zps50a7dd1e.jpg&hash=1e7bb65dd75ca40e387d4ba25c1dda2d2ea374f9)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2FIMG_1468-Copy_zps3dad32e7.jpg&hash=49544444ffc376f393e4dc254f05ccd4e07a015b)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2FIMG_1470-Copy_zpsbd78d8dd.jpg&hash=4c11f8fcd1ba1efb322ec9107d41e95b20cbc2b2)
-
Awesome build and great work!
-
I'm Glad to see my angle iron cart is getting so much use
-
there's something about a car when its in primer and ready for paint. It just looks so good!
I like Ross' work, I think you will be happy with it.
-
you can say that again Jake
i just went to pick up my fenders, hood, deck lid and doors from Ross today he even wet sanded and polished everything
looks awesome, shouldn't be long till i get the body and then the fun part begins
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2FIMG_3379_zpse7994565.jpg&hash=598cbfab869fd1efd341c67e1be991c98e9489e0)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2FIMG_3381_zpsb3df0e44.jpg&hash=c5848daaacf9ed9e95be82104f6d15bdb38400e9)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1275.photobucket.com%2Falbums%2Fy458%2Fvolks1960%2FIMG_3384_zps53eeef94.jpg&hash=0ef43ac20faf83cfb53fd71c9adb95bf8cc9e3c1)
-
You're single, right?
-
Great Color!!!
-
Ha ha ya gsun, I'd rather buy a vintage speed exhaust then some necklace, and I doubt I'd get away with spending all my time in the garage for that matter as well
And thanks taigabus, it took a long time to choose, I like it a lot too
-
Sweet! Go Kevin go!
-
Looks great Kevin, nice work on the prep, you'll be happy you spent the time to clean it up in advance.
-
Nice addition to the living room
-
ha ha
i thought it was a nice addition to the room as well, but mom didn't and i was promptly told to put everything some where else
well i got the rest of the car back today, looks awesome. And due to a lack to storage space we were ambitious and put the body back on the pan today
here are some pictures
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2FMobile%2520Uploads%2F20150110_124622.jpg&hash=1d4db9047f48a5e338ad8447542452dd3204f252)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2FMobile%2520Uploads%2F20150110_125531.jpg&hash=5cef779242fcb7c6bb9e73707bb80540327da2db)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2FMobile%2520Uploads%2F20150110_125541.jpg&hash=f0dcdf82cb796c255dd1c0b4c6bfdb9357c303d9)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2FMobile%2520Uploads%2F20150110_142335.jpg&hash=ace591d78a7c6953680cf934fd723feb0ce6c22b)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2FMobile%2520Uploads%2F20150110_142452.jpg&hash=ac9267e1ea8a52ea4b775f2c28a8220c69ded072)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2FMobile%2520Uploads%2F20150110_145515.jpg&hash=41dca085228e79694b963ce244f2a71c90f41681)
-
body & paint turned out great. colour is killer! reassembly time!
keep up the great work kevin, you'll be rolling in no time! :cool:
-
finally back at it!
since last post i have bolted the body to the pan, built the doors, done all the sound deadening inside with rattle trap, re wired the whole car, put the dash together and most everything in front of it, i have also been thinking about how I'm going to mount the 356 bucket seats i bought off Geoff
here are some more pictures
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2FIMG_5289.jpg&hash=d8238888b0b8a632bcd8b17184de883b024f4705)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2FIMG_5290.jpg&hash=22d6fe39419dcf3dfa599e5913a99fb2bf760bcf)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2FIMG_5284.jpg&hash=aa58130833f12a86d22d562386bd28d2504d1965)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2FIMG_5287.jpg&hash=8bd3181d612c4dcd8a4afe5fe5a7fccaf4a1c45a)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2FIMG_5288.jpg&hash=494b1a864024f2ba5b6790ac8db321c99020a84c)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2FIMG_5293.jpg&hash=8bacafc196cedceb2a7632b019b920aa7cacdb23)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2FIMG_5294.jpg&hash=cf22d0020f414c516416c56627da1569d4f1e1f6)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2FIMG_5292.jpg&hash=6866486c50b6747f43307410c5c178cc45e21b0a)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2FIMG_5291.jpg&hash=0f214d6547dde7f628646f54c27ecb2b7ce69dd3)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2FIMG_5283.jpg&hash=dd8bdd7d70219c42d805ec9ffd3fe454840f4a3f)
-
It looks fantastic! Great Job! What color interior are you going with?
-
Woot_Emoticon Woot_Emoticon
Car is looking awesome, Kevin!
-
looks killer man,
I pretty much at the same stage as you reassembly after paint.
keep it up
-
got the car on the road this weekend, not going to say its totally finished, i have a feeling this project will never be completely finished but its done for now, and just in time for the great Canadian!!
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2Fbeetle2.jpg&hash=82260fe09bf50a28e82d11d8f9040d392e9d859e)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2FIMG_5930.jpg&hash=a6195ff7d90dc56252568f0c1697b3760d796934)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2Fmybeetleandfinishedengine051.jpg&hash=76f9b0e474f685e10681b1a6b5d1ba801c6aa54a)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2FIMG_5913%25202.jpg&hash=9794a70c59420e36a903ab17e15d3c982eec5991)
Hard to believe its the same car
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2FIMG_5928.jpg&hash=0fdce8f781adbdd3ba95bac7b072ff761e1305ac)
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2FIMG_5925.jpg&hash=d18b516217dc77dd9bf76027f846b29b2667e595)
-
Hard to believe its the same car
No doubt!, nice work, looks awesome! Congratulations!
-
Turned out killer! Sportin' IDA's to boot!!! Nice work :rockon: :rockon: :rockon: :rockon: :rockon:
-
:whoo: Proud parent of an air cooled nut !
-
That's fantastic Kevin! Car is looking sharp! I really dig the wheels capless, gives a early cal look feel to the car!
-
great work Kevin
-
Can't wait to see it Kevin, nice work!
-
Wow.
That looks fantastic. Nice work!
-D
-
Looks amazing Kevin! Glad to see those doors put to good use.
Victor
-
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2FIMG_5913%25202.jpg&hash=9794a70c59420e36a903ab17e15d3c982eec5991)
stunning!!
great work kevin!! your hard work and determination has really paid off...you have built a very beautiful car that you should be very proud of. congrats!!
the look ticks all the boxes imho...wheels & tires, stance, motor, colour, interior, bolt ons...love it!!
-
(https://airspeedparts.com/forums/proxy.php?request=http%3A%2F%2Fi1231.photobucket.com%2Falbums%2Fee520%2Fvolks5%2FIMG_5913%25202.jpg&hash=9794a70c59420e36a903ab17e15d3c982eec5991)
stunning!!
great work kevin!! your hard work and determination has really paid off...you have built a very beautiful car that you should be very proud of. congrats!!
the look ticks all the boxes imho...wheels & tires, stance, motor, colour, interior, bolt ons...love it!!
I agree with Silas on all points, really nice!
-
Stunning! Beautiful job
-
Looks great! Can't wait to see it at the show.
-
Thanks for all the positive feed back every one,
cant wait for racing and the show this weekend!!
-
can your dad be my dad too? ;)
-
can your dad be my dad too? ;)
Ha Ha ...you'd be disappointed too :laugh:
I wish I could take credit for the way this car turned out .....nope ..... 100% Kevin
-
Hank,
That's the young man's bug?
Looking good.