Author Topic: Heater/cooling lever removal  (Read 1710 times)

0 Members and 1 Guest are viewing this topic.

Offline 1969deluxebus

  • Full Member
  • Posts: 337
  • Karma: 0
  • Cruising in a Bay is the only way.
Heater/cooling lever removal
« on: September 12, 2012, 11:45:13 PM »
I am wanting to change my speedo needle  and to do that I need to take the gauge pod out. Anyone have a trick or advice for taking out those clips that hold the heater levers in. 
Thanks
Matt
I love driving and I love driving either my bay window or TDI

Offline BUSDADDY

  • Full Member
  • Posts: 1273
  • Karma: 7
  • Like potato chips, you can't have just one
Re: Heater/cooling lever removal
« Reply #1 on: September 13, 2012, 07:07:39 AM »
Push a 7mm or 8mm socket onto the pointy end and they pop right out, disconnect the battery first as the metal antirattle spring falls onto the hazard switch when you pull the lever out.
RUST NEVER SLEEPS

Offline 1969deluxebus

  • Full Member
  • Posts: 337
  • Karma: 0
  • Cruising in a Bay is the only way.
Re: Heater/cooling lever removal
« Reply #2 on: September 14, 2012, 02:25:37 PM »
Thanks
I love driving and I love driving either my bay window or TDI