Author Topic: Removing stuck inner bearing on spindle  (Read 4163 times)

0 Members and 1 Guest are viewing this topic.

Offline WhiteDonkey

  • Full Member
  • Posts: 36
  • Karma: 0
  • AirSpeed Forum Member
Removing stuck inner bearing on spindle
« on: September 17, 2015, 08:44:42 PM »
Hi all and thx in advance

I have a king n link front beam and the inner race for the bearing is stuck on the spindle .....I've soaked and heated.......still does not remove .....any tricks or ideas pls

Offline jim martin

  • If something is priced to good to be true ,do yourself a favour. DONT be a IDIOT and BUY IT
  • *
  • Posts: 1406
  • Karma: 1
    • http://www.dialedinperformance.com
Re: Removing stuck inner bearing on spindle
« Reply #1 on: September 17, 2015, 09:18:26 PM »
Drill it then split it with a chisel




the 'WOK" June 2006 Hot VW's feature car  9.830 sec at 143.44 mph.
Sponsored by : LUCAS OIL PRODUCTS   www.lucasoil.com
KROC head porting services
Dialedinp

Offline Bruce

  • Full Member
  • Posts: 2913
  • Karma: -65458
Re: Removing stuck inner bearing on spindle
« Reply #2 on: September 18, 2015, 12:29:51 AM »
You should be able to clamp a bearing splitter into the groove between the bearing and the spindle. Then use a standard puller on the bearing splitter.

If that doesn't work, take an angle grinder and grind it at 12 O'Clock until it is super thin.  Then hit it with a hammer and it should split.

Offline Chris

  • Posts: 6118
  • Karma: -125
  • Car.
Re: Removing stuck inner bearing on spindle
« Reply #3 on: September 18, 2015, 12:39:38 AM »
If he was running late and didn't get to it until 12:30, would it still work?