AirSpeed VW Community Forums
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email
?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Calendar
Staff List
Login
Register
AirSpeed VW Community Forums
»
General Forums
»
VW Club Corner
»
Third Progresion Hole Drilling
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Third Progresion Hole Drilling (Read 2198 times)
0 Members and 1 Guest are viewing this topic.
btljuce
Full Member
Posts: 424
Karma: 0
Third Progresion Hole Drilling
«
on:
November 06, 2003, 10:02:35 PM »
hey geoff,paul from edmonton here,did you remember the drill bit size for the third progression hole mod?do you have any step by step pics of this mod?if so can you e mail them to me at pcgagne@shaw.ca thanks dude! oh yeah,got that web cam and lifters etc thanks.did you get the ida stack covers in yet???
Logged
Der Kleiner Rennwagens
56 rag oval now 2332 !!
56 wolfsburg kombi
Bruce
Full Member
Posts: 2912
Karma: -65458
Third Progresion Hole Drilling
«
Reply #1 on:
November 08, 2003, 03:30:40 AM »
The hole is 1.0mm, but you should pre-drill it to .7-.9mm otherwise the hole will end up quite a bit bigger than 1.0mm even if you use a 1.0mm drill.
Logged
btljuce
Full Member
Posts: 424
Karma: 0
Third Progresion Hole Drilling
«
Reply #2 on:
November 09, 2003, 03:53:26 PM »
^_^ thanks for the advice! now all i do is remove the mixture screws,and the brass screw (or plug) right? and then drill away? geoff mentioned drill the third hole above the other two as well. anyone know why?is this mod easy to screw up?
or is it straight forward?
Logged
Der Kleiner Rennwagens
56 rag oval now 2332 !!
56 wolfsburg kombi
Bruce
Full Member
Posts: 2912
Karma: -65458
Third Progresion Hole Drilling
«
Reply #3 on:
November 11, 2003, 01:27:16 PM »
Very easy to screw up. Not only do you have to get the hole in the right place, all 4 have to be the same.
Logged
James Buchan
Full Member
Posts: 6403
Karma: -51
Third Progresion Hole Drilling
«
Reply #4 on:
November 11, 2003, 02:08:20 PM »
FYI Bruce did mine for me - have him do it.
Logged
btljuce
Full Member
Posts: 424
Karma: 0
Third Progresion Hole Drilling
«
Reply #5 on:
November 12, 2003, 09:35:56 PM »
thanks for the advice,when i'm ready to do this,should i just send the carbs to geoff? if so how much do you need for this ?and how long will you need them?if you want,e mail me the particulars. pcgagne@shaw.ca just put weber drilling as the subject.thanks
Logged
Der Kleiner Rennwagens
56 rag oval now 2332 !!
56 wolfsburg kombi
Print
Pages: [
1
]
Go Up
« previous
next »
AirSpeed VW Community Forums
»
General Forums
»
VW Club Corner
»
Third Progresion Hole Drilling